Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial AutomationRS232/RS422/RS485 Serial Device Server with 1-Port 100BASE-FX SFP

ICS-110/ICS-115A

RS232/RS422/RS485 Serial Device Server

Cost-effective Solution for RS232/422/485 Serial-to-Ethernet Application

PLANET ICS-11x Serial Device Server series is specially designed to convert

RS232, RS422 or RS485 serial communication to Fast Ethernet networking to

extend the network distance efciently and inexpensively.

Serial Interface

• One DB9 interface supports RS232, 2-wire RS485, 4-wire

RS485 and RS422 operation

• Asynchronous serial data rates up to 921600bps

• Data mode includes VCOM, RFC2217, TCP Server, TCP

Client, UDP, Remote Pair, Modbus converter server / client

and Serial Telnet modes

Ethernet Interface

• 1-port 10/100BASE-TX RJ45 interface with auto MDI/

MDI-X function

• 1-port 100BASE-FX SFP Slot

Management

• IPv4 and IPv6 dual stack management

• Remote Management Interfaces

– IP-based Web management

– Telnet console management

– Windows-based VCOM utility supports searching,

monitoring and conguration setting

• IP NTP (Network Time Protocol)

• Standard TCP/IP interface and versatile operation modes

• Software Protocol supports ICMP, TCP/IP, UDP, HTTP

server, DHCP client, Telnet server/client

• Serial Operation mode selected via management interface

• Pair Connection mode for connecting two serial devices

over a network

• Allows a maximum of 4 hosts to be accessed as TCP

client mode

• Firmware upgrade via HTTP protocol

• Accessible IP security control to prevent illegal users

• Event notication

– Remote syslog server

– SNMP trap

• DHCP client for IP address assignment

• PLANET Smart Discovery utility automatically nds the

There are one 10/100BASE-TX RJ45 port and single-mode/multi-mode media

available in the ICS-11x series and its operating temperature ranges from -10 to 60

degrees C for your network needs. The ICS-11x series is a time-saving and cost-

effective solution for users and system integrators to quickly transform their serial

devices into the Ethernet network with no need of replacing the existing serial

devices and software system.

IP Networking Serial Devices

ICS-110/ICS-115A

Serial Device Server Series

TCP/IP Protocol

RS232/422/485

Workstation

Ethernet

Convert Serial Communication to IP Networking

Serial bus

Extending Distance (Only ICS-115A)

The ICS-115A is able to extend the distance of deploying serial equipment and

hosts. The selectable fiber-optic cables on the basis of distance are provided.

Therefore, this product will perfectly satisfy the diverse demands while providing

reliable and efficient network solutions based on the distance and budgets of

installation.

Summary of content (7 pages)

PAGE 1
ICS-110/ICS-115A RS232/RS422/RS485 Serial Device Server Serial Interface • One DB9 interface supports RS232, 2-wire RS485, 4-wire RS485 and RS422 operation • Asynchronous serial data rates up to 921600bps • Data mode includes VCOM, RFC2217, TCP Server, TCP Client, UDP, Remote Pair, Modbus converter server / client and Serial Telnet modes Cost-effective Solution for RS232/422/485 Serial-to-Ethernet Application PLANET ICS-11x Serial Device Server series is specially designed to convert RS232, RS422 or RS485
PAGE 2
ICS-110/ICS-115A client devices on the network Remote Monitoring Center Public Area 100BASE-FX 2km to 120km 100 Control Keyboard RS-485 Extended Distance RS-485 ICS-115A PTZ Digital Input ICS-115A IP Address: 192.168.0.100 IP Address: 192.168.0.
PAGE 3
ICS-110/ICS-115A Applications Access Control System – Traditional System Application Most of the enterprises and government use access control plate and Mifare or RFID to authorize entrance identity. Traditionally, the access control machines use RS232 or RS485 serial interface with their cables connecting to login server. By applying the ICS-11x Serial Device Server series, the access control machine is able to extend the network over longer distances via Ethernet interfaces.
PAGE 4
ICS-110/ICS-115A RTU Data Collect – UDP Mode Connect with RTU (remote terminal unit) to collect and monitor the data of waves, signal and power utilization. The ICS-11x can be used to set up UDP mode and send data over Fast Ethernet to local server or over Internet to remote server automatically.
PAGE 5
ICS-110/ICS-115A Drawing ■ ICS-110 26.20 10/100TX LNK/ ACT 70.30 PWR 0 49.00 3.00 30.20 0 7.0 70.30 PWR RS232/422/485 Serial Device Server Serial 0 R1 .0 50.10 Unit: mm 5.50 .0 R1 3.00 5.50 100FX SFP LNK/ ACT ICS-115A RS232/422/485 Serial Device Server 49.00 3.00 30.20 3.00 5.50 0 7.0 0 Serial 50.10 Unit: mm 5.50 4.0 ICS-110 RS232/422/485 Serial Device Server RS232/422/485 Serial Device Server 94.00 ■ ICS-115A 26.20 94.00 5 4.
PAGE 6
ICS-110/ICS-115A Specifications Product ICS-110 ICS-115A Serial Interface Serial Port 1 x DB9 male Serial Standards RS232/RS422/4-wire RS485/2-wire RS485 Baud Rate (Data Rate) 50bps to 921Kbps Data Bits 5, 6, 7, 8 Stop Bit 1, 1.
PAGE 7
ICS-110/ICS-115A Windows-based Only: Windows XP Windows Server 2003 Virtual COM Utility Platform Supports Windows 7 Windows Server 2008 Windows 8 (Must install the latest version of WinPcap) Windows Server 2012 (Must install the latest version of WinPcap) Windows 10 Fault Alarm Record: System log / SNMP trap Time NTP Security Accessible IP (white list) SNMP SNMP v1 and v2c Standards Conformances Regulatory Compliance FCC Part 15 Class A, CE Certification Class A IEEE 802.3 10BASE-T, IEEE 802.