Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial AutomationIndustrial 1-Port RS232/RS422/RS485 Serial Device Server

ICS-2100T/ ICS-2105AT

Industrial 1-Port RS232/RS422/RS485 Serial Device Server

Serial Interface

• One DB9 interface that supports RS232

• One terminal block interface that supports 2-wire RS485

and 4-wire RS422/RS485 standards

• Asynchronous serial data rates up to 921600bps

• Data mode including VCOM, RFC2217, TCP Server, TCP

Client, UDP, remote pair, Modbus converter server / client

and serial telnet modes

Ethernet Interface

• 1-port 10/100BASE-TX RJ45 with auto MDI/MDI-X function

or 100BASE-FX SFP interface

Management

• IPv4 and IPv6 dual stack management

• Remote management interfaces

– IP-based Web management

– Telnet console management

– Windows-based VCOM utility supports searching,

monitoringandconguration setting

• IP NTP (Network Time Protocol) and DNS management

• Standard TCP/IP interface and versatile operation modes

• Software Protocol supports ARP, ICMP, TCP/IP, UDP,

HTTP server, DHCP client, Telnet server/client

• Serial Operation mode selected via management interface

• Pair Connection mode for connecting two serial devices

over a network

• Allows a maximum of 4 hosts to be accessed as TCP

client mode

• Firmware upgrade via HTTP protocol

• Accessible IP security control to prevent illegal users

• Eventnotication

– Remote syslog server

– SNMP trap

– Relay output alarm

• DHCP client for IP address assignment

• PLANETSmartDiscoveryutilityautomaticallyndsthe

client devices on the network

Cost-effective Solution for RS232/422/485 Serial-to-Industrial Ethernet

Application

PLANET ICS-210xT Serial Device Server series is specially designed to convert

RS232, RS422 or RS485 serial communication to Industrial Fast Ethernet

networking so as to extend the network distance efficiently and inexpensively.

There are one 10/100BASE-TX RJ45 port and single-mode/multi-mode media

available in the ICS-210xT series and its operating temperature ranges from -40 to

75 degrees C for your network needs. The ICS-210xT series is a time-saving and

cost-effective solution for users and system integrators to quickly transform their

serial devices into the Ethernet network with no need of replacing the existing serial

devices and software system.

IP Networking Serial Devices

ICS-2100T/ICS-2105AT

Serial Device Server Series

TCP/IP Protocol

RS232/422/485

Workstation

Ethernet

Convert Serial Communication to IP Networking

Serial bus

Efciently Extend Network Distance (Only ICS-2105AT)

The ICS-2105AT especially equips one SFP fiber slot (mini-GBIC 100Base-FX

SFP or small-form factor pluggable) and is able to extend the distance of deploying

serial equipment and hosts. Users are able to select fiber-optic cables (based on

distance)providedfordistanceextensionfrom550meters(viamulti-modeber)to

120kilometers(viasingle-modeber)orlonger.

Summary of content (8 pages)

PAGE 1
ICS-2100T/ ICS-2105AT Industrial 1-Port RS232/RS422/RS485 Serial Device Server Serial Interface • One DB9 interface that supports RS232 • One terminal block interface that supports 2-wire RS485 and 4-wire RS422/RS485 standards • Asynchronous serial data rates up to 921600bps • Data mode including VCOM, RFC2217, TCP Server, TCP Client, UDP, remote pair, Modbus converter server / client and serial telnet modes Cost-effective Solution for RS232/422/485 Serial-to-Industrial Ethernet Application PLANET ICS-210
PAGE 2
ICS-2100T/ ICS-2105AT Remote Management Industrial Case and Installation As the ICS-210xT series provides easy serial-to-Ethernet connectivity and • IP30 metal case connection to a TCP/IP network, the remote network system can thus be managed • DIN-rail and wall-mount designs efficiently via its Web, telnet, and VCOM management interfaces.
PAGE 3
ICS-2100T/ ICS-2105AT Effective Alarm Alert for Better Protection The ICS-210xT series comes with a Fault Alarm feature which can alert the users when there is something wrong with the Serial Device Server. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource.
PAGE 4
ICS-2100T/ ICS-2105AT Process Control To monitor, configure and manage the robotic conveyer including other production machines, PLC (Programmable Logical Control) is required to drive the above manufacturing process. The ICS-210xT series can be set to the TCP Server mode and connected to the PLC. Thus, the administrator can configure and set command settings through Fast Ethernet intranet to remotely control the PLC, without having to stand by the I/O machine.
PAGE 5
ICS-2100T/ ICS-2105AT Drawing ■ ICS-2100T Top View 30.00 PWR1 Fault V1+ Mounting Kit PWR2 V2+ V2 DC Input: 9-48V , 1A max. AC Input: 24V , 0.5A max. Max. fault loading: 24V, 1A Front View 28.00 18.00 Side View Rear View Side View 15.20 40.00 28.00 9.20 PWR1 PWR2 Fault 46.50 Reset LNK/ ACT Rx Tx 53.50 10/100TX DIN-Rail Kit 48.80 48.80 135.00 RS232 53.50 28.00 TxD+ 39.70 RxD+ RS422/485 40.00 28.00 ICS-2100T 18.00 87.80 32.00 18.00 28.00 97.
PAGE 6
ICS-2100T/ ICS-2105AT Specifications Product ICS-2100T ICS-2105AT Serial Interface Serial Ports 1 x DB9 male for RS232 1 x 4-Pin Terminal block for RS422 / RS485 Serial Standards RS232 / 4-wire RS422 or RS485 / 2-wire RS485 Baud Rate (Data Rate) 50bps to 921Kbps Data Bits 5, 6, 7, 8 Parity Type 1, 1.
PAGE 7
ICS-2100T/ ICS-2105AT TCP Server TCP Client UDP Client Virtual COM Operation Mode RFC2217 Telnet Server Pair Connection – Remote (Slave) Pair Connection – Local (Master) Modbus converter server / client Windows-based only: Windows XP Windows Server 2003 Virtual COM Utility Platform Supports Windows 7 Windows Server 2008 Windows 8 (Must install the latest version of WinPcap) Windows Server 2012 (Must install the latest version of WinPcap) Windows 10 Security SNMP MIBs Allow max.
PAGE 8
ICS-2100T/ ICS-2105AT Related Products ICS-2200T IP30 Industrial 2-Port RS232/RS422/RS485 Serial Device Server (2 x 10/100TX, -40~75 degrees C, 2KV isolation) ICS-2400T IP40 Industrial 4-Port RS232/RS422/RS485 Serial Device Server (2 x 10/100TX, -40~75 degrees C, 2KV isolation, 2xDI + 2xDO) ICS-2100 Industrial RS-232/RS-422/RS-485 over 10/100BASE-TX Media Converter (Copper, RJ-45) ICS-2105A Industrial RS-232/RS-422/RS-485 over 100BASE-FX SFP Media Converter PLANET Technology Corporation 11F., No.