Datasheet
ICS-2105AT/ICS-2102T/ICS-2102TS
1
Industrial 1-Port RS232/422/485 Serial Device Server with
1-Port 100BASE-FX
Serial Interface
• One DB9 interface that supports RS232
• One terminal block interface that supports 2-wire RS485
and 4-wire RS422/RS485 standards
• Asynchronous serial data rates up to 921600bps
• Data modes include VCOM, RFC2217, TCP Server, TCP
Client, UDP, Remote Pair, Modbus converter server / client
and Serial Telnet modes
Ethernet Interface
• Choiceofber-connectorfromSC/LC,multi-mode/single
modeber
Management
• IPv4andIPv6dualstackmanagement
• RemoteManagementInterfaces
– IP-basedWebmanagement
– Telnetconsolemanagement
– Windows-basedVCOMutilitysupportssearching,
monitoringandcongurationsetting
• IPNTP(NetworkTimeProtocol)andDNSmanagement
• Standard TCP/IP interface and versatile operation modes
• Software Protocol supports ARP, ICMP, TCP/IP, UDP,
HTTP server, DHCP client, Telnet server/client
• SerialOperationmodeselectedviamanagementinterface
• PairConnectionmodeforconnectingtwoserialdevices
over a network
• Allows a maximum of 4 hosts to be accessed as TCP
client mode
• FirmwareupgradeviaHTTPprotocol
• AccessibleIPsecuritycontroltopreventillegalusers
• Eventnotication
– RemoteSyslogserver
– SNMP trap
– Relay output alarm
• DHCPclientforIPaddressassignment
• PLANETSmartDiscoveryutilityautomatically ndsthe
client devices on the network
Cost-effective Solution for RS232/422/485 Serial-to-Industrial Ethernet
Application
PLANETICS-210xTSerialDeviceServerseriesisspeciallydesignedtoconvert
RS232,RS422orRS485serialcommunicationtoIndustrialFastEthernetnetworking
so as to extend the network distance efficiently and inexpensively. There is one
100BASE-FXsingle-mode/multi-modemediaavailableintheICS-210xTseriesandits
operatingtemperaturerangesfrom-40to75degreesCforyournetworkneeds.The
ICS-210xTseriesisatime-savingandcost-effectivesolutionforusersandsystem
integratorstoquicklytransformtheirserialdevicesintotheEthernetnetworkwithno
needofreplacingtheexistingserialdevicesandsoftwaresystem.
Efciently Extend Network Distance
TheICS-210xTseriesespeciallyequipsoneberinterface(100BASE-FX,choiceof
ber-connectorfromSC/LC,multi-mode/single-modeber)andisabletoextend
thedistanceofdeployingserialequipmentandhosts.Usersareabletoselectber-
optic cables (based on distance) provided for distance extension from 2 kilometers
(viamulti-modeber)to60kilometers(viasingle-modeber)orlonger.
IP Networking Serial Devices
ICS-2105AT/ICS-2102T(S)
Serial Device Server Series
TCP/IP Protocol
RS232/422/485
Workstation
Convert Serial Communication to IP Networking
Serial bus
Fiber