User's Manual

User’s Manual of IGS-2x00T Serial Device Server Series
37
4.2.5 Console
This page is to configure management methods for web and remote console. The screen in Figure 4-2-5 appears.
Figure 4-2-5: Console Setup Page Screenshot
The page includes the following fields:
Object Description
• Web Console
To enable or disable access to the web console. The default is Enable.
• Remote Console
To enable or disable access to the remote console. The default is Enable.
• Current Time
To check whether the reset button is working or not. The default is No.
4.2.6 Fault Alarm
This page provides configuration for fault alarm. The screen in Figure 4-2-6 appears.
Figure 4-2-6: Fault Alarm Control Page Screenshot
The page includes the following fields:
Object Description
• Buzzer
To check whether Buzzer is enabled on this switch.
• Record
To check whether Record is sending System log or SNMP Trap or both.
• Event
To check whether Power, Connection, etc. are working or not.
• Power Alarm
PWR1 or PWR2 or both have faulted..
• Monitoring of DCD Change
Monitor which Port or all for DCD signal that has changed.
• Monitoring of DSR Change
Monitor which Port or all for DSR signal that has changed.