Datasheet
ICS-2200T/ICS-2400T
1
Industrial RS232/RS422/RS485 Serial Device Server
Serial Interface
• Two/four DB9 interfaces support RS232, 2-wire RS485,
4-wire RS485 and RS422 operation
• Asynchronous serial data rates up to 921600bps
• Data mode including VCOM, RFC2217, TCP Server, TCP
Client, UDP, Remote Pair and Serial Telnet modes
Ethernet Interface
• 2-port 10/100BASE-TX RJ45 interface with auto MDI/MDI-X
function
• Ethernet ports support Ethernet switch or cascading operation
for easy wiring
Management
• IPv4 and IPv6 dual stack management
• Remote Management Interfaces
– IP-based Web management
– Telnet console management
– Windows-based VCOM utility supports searching,
monitoringandcongurationsetting
• IP NTP (Network Time Protocol) and DNS management
• Standard TCP/IP interface and versatile operation modes
• Software Protocol supports ARP, ICMP, TCP/IP, UDP, HTTP
server, DHCP client, Telnet server/client
• Serial Operation mode selected via management interface
• Pair Connection mode for connecting two serial devices over
a network
• Allows a max. of 4 hosts to be accessed as TCP client mode
• Firmware upgrade via HTTP protocol
• Accessible IP security control to prevent illegal users
• Eventnotication
– Remote Syslog server
– SNMP trap
– Built-in buzzer
– Relay output alarm
– Digital Output (ICS-2400T)
• DHCP client for IP address assignment
• PLANETSmartDiscoveryutilityautomaticallyndstheclient
devices on the network
Cost-eectiveSolutionforRS232/422/485Serial-to-IndustrialEthernet
Application
PLANET ICS-2x00T Serial Device Server series is specially designed to convert
RS232, RS422 or RS485 serial communication to Industrial Fast Ethernet networking
so as to extend the network distance efficiently and inexpensively. There are two
10/100BASE-TX RJ45 ports available in the ICS-2x00T series for your network
needs. The ICS-2x00T series is a time-saving and cost-effective solution for users
and system integrators to quickly transform their serial devices into the Ethernet
network with no need of replacing the existing serial devices and software system.
Remote Management
As the ICS-2x00T series provides an easy serial-to-Ethernet connectivity and
connection to a TCP/IP network, the remote network system can thus be managed
efficiently via its Web, telnet and VCOM management interfaces. It supports both
application and serial operation modes for alarm or IP address connection, which
saves the network administrator’s time in detecting and locating network problems
without visual inspection of the cabling and devices. Multiple connection options are
available for large networking environment as well.
IP Networking Serial Devices
Serial bus
ICS-2200T/ICS-2400T
Serial Device Server Series
TCP/IP Protocol
RS232/422/485
Serial bus
Workstation
Ethernet
Convert Multiple Serial Devices to IP Networking