Datasheet

3
ICS-2200T/ICS-2400T
Digital Input and Digital Output for External Alarm
With digital input and digital output on its front panel, an external alarm can help users via the digital input to detect and log external device status (such as door
intrusion detector), and then immediately send an event alarm to the administrator. The digital output can be used to alarm the administrator if the ICS-2400T
serial port shows DCD, changed DSR or power failure.
PWR1
PWR2
RS232 Connection
Failed via DCD/DSR
DC/DC Power Failure
Fault Alarm Feature
SNMP
TRAP
Buzzer
or
System
Log
DCDC
Applications
Access Control System – Traditional System Application
Most of the enterprises and government use access control plate and Mifare or RFID to authorize entrance identity. Traditionally, the access control
machines use RS232 or RS485 serial interface with their cables connecting to login server. By applying the ICS-2x00T Serial Device Server series, the
access control machine is able to extend the network over longer distances via Ethernet interfaces. In addition, the ICS-2x00T series can be linked to an
xDSL router to get the internet access capability so that the access control can be set and monitored over the internet.
Administration Department
Account
Authentication Server
Ethernet Switch
11F
Access
Control
Access
Control
I/O
B1F
Access
Control
ICS-2200T
ICS-2400T
100BASE-TX UTP
Serial Line (RS-XXX)
|O|O|
I/O
I/O