User's Manual

User’s Manual of ICS-2x00T Serial Device Server Series
13
1.5 Product Specifications
Product ICS-2100T ICS-2105AT
ICS-2102T
ICS-2102ST
ICS-2200T ICS-2400T
Serial Interface
Serial Ports
1 x DB9 male for RS232
1 x 4-pin Terminal block for RS422 / RS485
2 x DB9 male 4 x DB9 male
Serial Standards
RS232 / 4-wire RS422 or RS485 / 2-wire RS485
Baud Rate (Data Rate) 50bps to 921Kbps
Data Bits 5, 6, 7, 8
Parity Type 1, 1.5, 2
Stop Bit
Odd, Even, None, Space, Mark
Flow Control
RTS/CTS and DTR/DSR (RS232 only)
XON/XOFF
Signals
RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS422: Tx+, Tx-, Rx+, Rx-, GND
4-wire RS485: Tx+, Tx-, Rx+, Rx-, GND
2-wire RS485: Data A (+), Data B (-), GND
Pin Assignment
Ethernet Interface
Ethernet Ports 1 x RJ45 1 x SFP 1 x SC 2 x RJ45 2 x RJ45
Standard 10/100BASE-TX 100BASE-FX 10/100BASE-TX 10/100BASE-TX
Distance 100m
2km to 120km,
vary on SFP
modules
ICS-2102T: 2km
ICS-2102ST:
30km
100m 100m
Switch Architecture
- - Store-and-Forward-
Address Table - - 1K
ESD Protection 6KV
Surge Protection 2KV
Hardware
Installation DIN-rail kit and wall-mount ear
Enclosure IP 30 metal IP40 metal
Dimensions (W x D x H) 32 x 97 x 135 mm 56 x 87 x 135 mm
Weight
392g 390g 393g 477 g 625 g
LED Indicators
System: Power 1, Power 2, Fault, SYS, I/O(ICS-2400T only)
TP/SFP Port: Link/Active