User Manual

User’s Manual of ICS-2x00T Serial Device Server Series
47
4.5.2 Operation mode
The industrial serial server makes connected Serial equipment become IP-based. That also makes them able to connect to a
TCP/IP networking immediately. The industrial serial server allows traditional Computer/Client COM ports access to a serial
equipment anywhere on the Ethernet LAN network.
This operation mode can be set up as Disable, Remote Pair Master/Slave, RF2217, Serial Telnet, TCP Server, TCP Client,
UDP, Virtual COM and Modbus Converter Server/Client. The operation mode screen in Figure 4-5-3 appears.
Figure 4-5-3: Operation Mode Screenshot
4.5.2.1 Disable mode
When selecting disabled operation mode, the device port can be disabled. The disable mode screen in Figure 4-5-4 appears.
Figure 4-5-4: Disable Mode Screenshot
Object Description
• Apply to all serial
ports
To apply this configuration to all serial ports.
Buttons
: Click to apply port config changes.
When applying any configuration changes of industrial serial server, it’s required to
save changed
configuration and reboot system. Therefore the new configuration will be applied after rebooting.