User's Manual

User’s Manual of IGS-2x00T Serial Device Server Series
13
Serial Port: Tx and Rx TP Port: Link/Active
Serial Port: Tx and Rx
Power Requirements 12~48V DC, redundant power with reverse polarity protection
Power Consumption
Full Loading
12VDC: 0.326A (3.8 watts)
24VDC: 0.176A (4.2 watts)
48VDC: 0.114A (5.4 watts)
Full Loading
12VDC: 0.419A (5.1 watts)
24VDC: 0.227A (5.4 watts)
48VDC: 0.136A (6.5 watts)
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
DI and DO N/A
2 digital inputs:
Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.
2 digital outputs:
Open collector to 24V DC, 100mA max.
Alarm
Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Management
Management Interfaces
Web management
Telnet Console management
Windows-based VCOM Utility management
PLANET Smart Discovery Utility
IP Version IPv4 and IPv6
Operation Mode
TCP Server
TCP Client
UDP
Virtual COM
RFC2217
Telnet Server
Pair Connection – Remote (Slave)
Pair Connection – Local (Master)
Virtual COM Utility
Platform Supports
Windows-based only:
Windows XP
Windows Server 2003
Windows 7
Windows Server 2008
Windows 8 (Must install the latest version of WinPcap)
Windows Server 2012 (Must install the latest version of WinPcap)
Windows 10
Alert Built-in buzzer and RTC
Security Allows maximum 4 accessible IP address hosts/ranges