Industrial EtherCAT Slave I/O Module with Isolated 16-ch Digital Input/Output IECS-1116-DI/IECS-1116-DO
Presentation Outlines u Product Positioning u Applications u Product Overview u Comparison u Product Benefits u Appendix u Product Features 2 / 28
Product Positioning
Modes of Application Overview Factory Building Energy Transportation 4 / 28
PLANET EtherCAT Slave Module New Phase-in Planning 32-Ch IECS-1132-DI IECS-1232-DIDO IECS-1132-DO - - - 32-Ch digital input 2 RJ45 ports LED indicators DC 9-48V power input -40~75℃ DC mode synchronization 3750 Vrms photo-isolation IECS-1116-DI 16-Ch - 16-Ch digital input 2 RJ45 ports LED indicators DC 9-48V power input -40~75℃ DC mode synchronization 3750 Vrms photo-isolation Digital Input 16-Ch DI & 16-Ch DO 2 RJ45 ports LED indicators DC 9-48V power input -40~75℃ DC mode synchronization 3750
Product Overview
Product Overview u About EtherCAT Industrial Ethernet main communication protocol types: EtherCAT, EtherNet/IP, Ethernet PowerLink, Profinet, Modbus TCP/IP, SynqNet, CAN, and SerCos EtherCAT (Ethernet for Control Automation Technology) was proposed by Beckhoff in Germany in 2003 based on the Ethernet bus concept (Fieldbus System). 1.
Product Overview u IECS-1116-DI Front Panel ü LED Indication for the system power and system initialization ü LED Indication for the RJ45 Bus interface LNK/ ACT ü LED Indication for Digital Input port status ü PIN Definition for the 16-Ch Digital Input 8 / 28
Product Overview u IECS-1116-DO Front Panel ü LED Indication for the system power and system initialization ü LED Indication for the RJ45 Bus interface LNK/ ACT ü LED Indication for Digital Output port status ü PIN Definition for the 16-Ch Digital Output 9 / 28
Product Overview u IECS-1116-DI/DO Top View ü Three-contact terminal block with screws for the DC 9-48V power input ü Grounding screw ü Reverse polarity protection 10 / 28
Product Overview Mounting Kit DIN Rail 11 / 28
Product Benefits
Product Benefits u As required by customers Industrial 4.0 EtherCAT Compliance Higher Flexibility and Cost Effectiveness Conformance Test Tool Verified Industrial Grade DC 9-48V Power Input and -40-75℃ Operating Temp.
Product Features
Product Key Features -40 to 75 degrees C Operating Temperature 3750 Vrms Isolated Protection 16-Ch I/O Port IECS-1116-DI IECS-1116-DO DIN-rail/Wallmount type 2 x RJ45 Bus Interface 9~48V DC Power Input Distributed Clock (DC) Mode for Synchronization 15 / 28
Product Features u Hardware ü 1 x 3-contact terminal block with screws for power input ü 2 x RJ45 bus interface ü 1 x 20-contact I/O terminal block with screws ü Wet (sink/source)/Dry (source) input type for IECS-1116-DI ü Open collector (sink) output type for IECS-1116-DO ü LED Indicators for power, system, network and I/O interface diagnostics ü DIN-rail/Wall-mount type installation ü 3750 Vrms isolated and 5KV ESD protection ü Distributed Clock (DC) synchronization ü EtherCAT conformance test tool ver
Product Features u Industrial Conformance ü 9~48V DC power input designed with 3-contact terminal block ü -40 to 75 degrees operating temperature ü DIN-rail/Wall-mount type installation ü Stability tests include: • • • IEC61000-4-2 (ESD) IEC61000-4-4 (EFT) IEC61000-4-5 (Surge) 17 / 28
Product Features u ESI File (EtherCAT Slave Information file) ü XML format ü ESI File is used for Slave module identification for EtherCAT master unit. The ESI file is important for integration when the system adopts master unit of company A, and slave module of company B ü The ESI file tells the controller how to initialize the device like what the functions are, how to use it, etc. On the other hand, the ENI file is mainly to record which slaves are currently available, and how to set these slaves.
Product Features u Distributed Clock (DC) Synchronization ü The master sends a broadcast message that reads and writes the system clock, making the clock of the first slave a reference clock, and the internal clock of the other slaves is adjusted to be the same as the first slave. ü Each EtherCAT slave maintain a hardware clock and the minimum time interval is 1 nanosecond. It is normally called Local System Time.
Applications
Application EtherCAT Master Unit Up to 65535 Slave Units Ethernet/EtherCAT Cable (min.
Application -- Redundancy EtherCAT Master RX Unit RX TX MAC 1 MAC 2 RX Slave 1 TX Unit TX RX TX Slave N Slave 2 … 22 / 28
Appendix
Appendix Sales Target u Target Markets ü IE 4.0 ü Factory ü Service Provider ü System Integrator u Target Customers ü Planing to have the EtherCAT infrastructure or other alternatives. ü Those who have purchased IMG-110T, IMG-120T, ICS-2400T, ICG-2420LTE, and ICG-2420G-LTE.
Appendix u Available DIN-rail Power Supplies: ü PWR-40-24 40W 24V DC Industrial DIN-rail Power Supply (Voltage Adj. Range: 24~30V) ü PWR-60-24 60W 24V DC Industrial DIN-rail Power Supply (Voltage Adj. Range: 24~30V) ü PWR-75-24 75W 24V DC Industrial DIN-rail Power Supply (Voltage Adj.
/ 28