IFT-80x Series User Manual

16
2.2 Mounting Installation
This section describes how to install the Industrial Media
Converter and make connections to it. Please read the following
topics and perform the procedures in the order being presented.
Note
In the installation steps below, this Manual use
IGS-801(PLANET 8 Port Industrial Gigabit Switch)
as the example. However, the steps for PLANET
Industrial Media Converter are similar.
2.2.1 Install DIN-Rail Mounting
The DIN-Rail is screwed on the Industrial Media Converter when
out of factory. When need to replace the wall mount application
with DIN-Rail application on Industrial Media Converter , please
refer to following gures to screw the DIN-Rail on the Industrial
Media Converter. To hang the Industrial Media Converter, follow
the below steps:
Step 1: Screws the DIN-Rail on the Industrial Media
Converter.