Manualshelf

IFT-80x Series User Manual

ManualsBrandsPLANET Technology ManualsIndustrial Media ConvertersIP30 Industrial 10/100TX to 100FX Media Converter (SFP) (-40 ~ 75C)
19202122232425262728
25
Why the Industrial Media Converter doesn’t connect to the
network
Solution:
Check per port LED on the Industrial Media Converter. Try
another port on the Industrial Media Converter Make sure the
cable is installed properly Make sure the cable is the right type
Turn off the power. After a while, turn on power again.
Why I connect IFT-80xT to device with 100Base-FX interface
and the 100Base-FX ber connection fail?
Solution:
1. Please check the ber connection between two devices is
correct.
2. Please check the 100Base-FX interface from other devices run
at the same full duplex mode.