Datasheet

IGS-4215-8T2S
6
Specications
Product
IGS-4215-8T2S
HardwareSpecications
Copper Ports 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
Gigabit SFP Slots 2 100/1000BASE-SX/LX/BX SFP interfaces
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Connector
Removable 6-pin terminal block for power input
- Pin 1/2 for Power 1
- Pin 3/4 for fault alarm
- Pin 5/6 for Power 2
Alarm
One relay output for power failure.
Alarm relay current carry ability: 1A @ 24V DC
Power Requirements
Dual 9~48V DC
24V AC
Power Consumption
DC input:
Max. 1.98 watts/6.7BTU (System on)
Max. 6.93 watts/23.6BTU (Full loading)
AC input:
Max. 1.4 watts/4.7BTU (System on)
Max. 5.7 watts/19.4BTU (Full loading)
Enclosure IP30 metal case
Dimensions (W x D x H) 50 x 87.8 x 135 mm
Weight 510g
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
LED
System:
■Green: Power 1
■Green: Power 2
■Red: Alarm
■Green: Ring
■Green: R.O.
Per 10/100/1000T RJ45 Ports :
■Green: 1000 LNK/ACT
■Amber:10/100LNK/ACT
Per 100/1000X SFP Ports :
■Green: 1000 LNK/ACT
■Amber: 100 LNK/ACT
SwitchingSpecications
Switch Architecture Store-and-Forward
Switch Fabric 20G/bps (non-blocking)
Switch Throughput@64 bytes 14.8@ 64 bytes
MAC Address Table 8K entries
Shared Data Buffer 4.1M bits
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 9K
Layer 2 Functions
Port Mirroring
TX/RX/Both
Many-to-1 monitor
Up to 4 sessions
VLAN
802.1Q tag-based VLAN
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Up to 256 VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP and static trunk
Cisco ether-channel (Static Trunk)
Up to 5 trunk groups
Up to 10 ports per trunk group with 20Gbps bandwidth