Manualshelf

Datasheet

ManualsBrandsPLANET Technology ManualsDIN-rail Unmanaged Ethernet SwitchesCompact Industrial 5-Port 10/100/1000T Gigabit Ethernet Switch
12345
IGS-500T
2
As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually in demand, the IGS-500T is especially designed to make the
deployment of an industrial network easy as it comes with a Plug and Play feature. Besides, it is stable and reliable when it comes to fast data and
power transmission.
Low Power Consumption for Green Networking
The IGS-500T, adopting the advanced green networking technology, provides the link-on cable length power saving and link-down power saving
methods. These features make the IGS-500T consume very low power in full load operation mode, which helps conserve energy effectively but
maintainshighperformanceefciently.
With the Auto Power Saving and IEEE 802.3az Energy Efcient Ethernet (EEE) Protocol, the IGS-500T can automatically detect cable link status
andnetworktrafc,andthusisabletoadjustpowerconsumptionaccordingly.Itenablestheswitchtoconsumelesspowerwhenitislessactive.
Dual Power Input for High Availability Network System
The IGS-500T features a strong dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) incorporated into customer’s
automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover
function will be activated automatically to keep powering the IGS-500T via power supply 2 alternatively without any loss of operation.
High Switch Performance
The IGS-500T offers a high-performance switch architecture. With the 5 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric
and wire-speed throughput as high as 10Gbps and the 4K MAC address table, the IGS-500T can perform wire-speed packet transfer without the risk
ofpacketloss.TheowcontrolfunctionenablestheIGS-500Ttoprovidefastandreliabledatatransfer.
Plug and Play
All of the RJ45 copper interfaces in the IGS-500T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6,
5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-
through or crossover cables.
12V~48V DC
12V~48V DC
DC DC
Power
1
Power
2
Active
12V~48V DC
12V~48V DC
DC DC
Power
1
Power
2
Active Active
Camera
PC
Camera
PC
DC
Power Line (DC)
1000BASE-T UTP
Non-stop Ethernet Server
Dual Power Input with Auto Failover