(V2) Datasheet

IGS-504HPT
5
Specications
Model
IGS-504HPT
HardwareSpecications
Copper Ports 5 10/100/1000BASET RJ45 auto-MDI/MDI-X ports
PoE Injector Ports Four ports with 802.3at PoE+ injector function (Port-1 to Port-4)
SFP Slots N/A
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Power Requirements
12~56V DC, 7A (max.)
Redundant power with reverse polarity protection function
Power Consumption
Max. 7.02 watts/24BTU
(Ethernet Full Loading)
Max. 132 watts/450BTU
(Ethernet + PoE Full Loading)
Dimensions (W x D x H) 50 x 87 x 135 mm
Weight 605g
Enclosure IP40 metal case
Installation DIN-rail kit and wall-mount kit
ESD Protection 6KV
SwitchSpecications
Switch Architecture Store-and-Forward
Switch Fabric 10Gbps
Throughput (packet per second) 7.4Mpps@64bytes
Address Table 4K entries
Buffer Memory 1M bits on-chip buffer memory
Jumbo Frame 9Kbytes
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Output Per port 54V DC, max. 36 watts
PoE Power Budget (max.)
60W@12V DC input
90W@24V DC input
120W@48V-56V DC input
Max. Number of Class 4 PDs 4
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE802.3azEnergyEfcientEthernet(EEE)
IEEE 802.3at Power over Ethernet Plus PSE
IEEE 802.3af Power over Ethernet Plus
IEEE 802.1p Class of Service
Environment
Temperature
Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity
Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)