Datasheet
IGS-5225-16T4S
1
Industrial L2+ 16-Port 10/100/1000T + 4-Port
100/1000X SFP Managed Ethernet Switch
(-40~75 degrees C)
PLANET IGS-5225-16T4S, a new industrial Layer 2+ managed Gigabit Switch, features
16 10/100/1000Mbps ports and 4 100/1000X SFP ports, and supports static Layer 3
routing in a 1U case. With a total switch fabric of 40Gbps, the IGS-5225-16T4S can
handle large amounts of data in a secure topology linking to an industrial backbone or
high capacity servers. The IGS-5225-16T4S is capable of providing non-blocking switch
fabric and wire-speed throughput in the temperature range from -40 to 75 degrees C
without any packet loss and CRC error. It greatly simplifies the tasks of upgrading the
industrial LAN for catering to increasing bandwidth demands. Furthermore, it adopts
user-friendly “Front Access” design for easy wiring and maintenance of the IGS-5225-
16T4S when placed in the cabinet.
AC and DC Redundant Power to Ensure Continuous Operation
The IGS-5225-16T4S possesses a 100~240V AC power supply and dual 36~60V DC
power supply utilized as redundant power supply to ensure its continuous operation. Its
redundant power system is specifically designed to handle the demands of high-tech
facilities requiring the highest power integrity. Furthermore, with the 36~60V DC power
supply implemented, the IGS-5225-16T4S can be applied as a telecom level device and
placed in almost any difcult environment.
Digital Input and Digital Output for External Alarm
To help the network administrators efciently manage unexpected network situations, the
IGS-5225-16T4S provides Digital Input and Digital Output for external alarm device on
the front panel. The Digital Input can be used to detect and log the status of the external
devices such as door intrusion detector. The Digital Output could be used to send alarm
whenever the IGS-5225-16T4S has port link-down or power failure.
Physical Port
• 16-port 10/100/1000BASE-T RJ45 copper
• 4 100/1000BASE-X mini-GBIC/SFP slots, compatible with
100BASE-FX SFP
• RJ45 to RS232 DB9 console interface for basic management
and setup
Hardware Conformance
• One 100 to 240V AC or dual 36 to 60V DC power input,
redundant power with polarity reverse protection function
–
Active-active redundant power failure protection
–
Backup of catastrophic power failure on one supply
–
Fault tolerance and resilience
• 19-inch rack-mountable design
• IP30 metal case
• Supports 6000V DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature for DC power input
• -10 to 60 degrees C operating temperature for AC power input
Digital Input & Digital Output
• 2 Digital Input (DI)
• 2 Digital Output (DO)
• Integrates sensors into auto alarm system
• Transfers alarm to IP network via email and SNMP trap
Layer 3 IP Routing Features
• Supports maximum 32 static routes and route summarization
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE 802.3x pause frame ow control (full-duplex)
• High performance of Store-and-Forward architecture, and runt/
CRC ltering eliminates erroneous packets to optimize the
network bandwidth
• Storm control support
–
Broadcast/Multicast/Unknown unicast
• Supports VLAN
–
IEEE 802.1Q tagged VLAN
–
Up to 255 VLANs groups, out of 4095 VLAN IDs
–
Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
–
Private VLAN Edge (PVE)
–
Protocol-based VLAN
–
MAC-based VLAN
–
IP subnet-based VLAN
–
Voice VLAN
16 x 10/100/1000BASE-T RJ45
Grounding
AC Power Input and Switch
2 x DI/DO
DC Power Switch
2 x DC Power Input
4 x 100/1000BASE-X SFP Slot
RJ45 Type Console