Quick Guide
7
5. Logging On to The Console
Once the terminal is connected to the device, power on the Industrial Managed
Switchandtheterminalwilldisplay“running testing procedures”.
Then, the following message asks to log in user name and password. The factory
default user name and password are shown as follows and the login screen in
Figure5-1appears.
Username:admin
Password:admin
Figure 5-1: Industrial Managed Switch Console Login Screen
The user can now enter commands to manage the Industrial Managed Switch. For
adetaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.