Datasheet

Data Sheet
1
IGS-624HPT
1
Industrial 4-Port 10/100/1000T 802.3at PoE +
2-Port 100/1000X SFP Ethernet Switch (-40~75 degrees C)
Cost-e󰀨ective Full PoE+ Power Solution Ideal for Hardened Environment
Featuring Plug and Play designed to be installed in heavy industrial demanding
environments, the IGS-624HPT is a PLANET Industrial-grade, DIN-rail type
Unmanaged Gigabit Ethernet PoE+ Switch with four 10/100/1000BASE-T ports
featuring IEEE 802.3at PoE+ and two extra 100/1000BASE-X fiber SFP optic
interfaces for uplink connection.
Interface
• 4 10/100/1000BASE-T Gigabit Ethernet RJ45 copper ports
• Two SFP slots, supporting 1000BASE-X and 100BASE-FX
transceiver in dual modes (auto detection)
Power over Ethernet
• Complies with IEEE 802.3at Power over Ethernet Plus, end-
span PSE
• Backward compatible with IEEE 802.3af Power over Ethernet
• Up to 4 ports of IEEE 802.3af/at devices powered
• Up to 120-watt PoE budget
• Supports PoE power up to 36 watts for each PoE port
• Each port supports 54V DC power to PoE powered device
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
Layer 2 Switching
• Features Store-and-Forward mode with wire-speed ltering
and forwarding rates
• IEEE 802.3x ow control for full duplex operation and back
pressure for half duplex operation
• 4K MAC address table size
• 9K jumbo frame
• IEEE 802.1Q VLAN transparency
• Automatic address learning and address aging
• Supports CSMA/CD protocol
Industrial Case and Installation
• IP40 metal case
• DIP switch for switch or redundant mode selection
• 4 real-time PoE power usage indicators
• DIN-rail, wall-mount or side wall-mount design
• 12~56V DC redundant power with reverse polarity protection
• Fault alarm for power input failed
• Supports 6KV DC Ethernet ESD protection
• -40 to 75 degrees C operating temperature
The IGS-624HPT, designed with redundant power system, is able to operate reliably,
stably and quietly in any hardened environment without affecting its performance.
It comes with a total power budget of up to 120 watts for different kinds of PoE
applications and operating temperature ranging from -40 to 75 degrees C in a
rugged IP40 metal housing.
Convenient and Reliable Power System
To facilitate the 802.3at PoE+ usage with commonly used 12~56V DC power input
for transportation and industrial-level applications, the IGS-624HPT adopts 12~54V
DC to 54V power boost technology to solve power source issue but does not
require special power supplies. The IGS-624HPT provides an integrated power
solution with a wide range of voltages (12~56V DC) for worldwide operability. It also
provides dual-redundant, reversible polarity 12~56V DC power supply inputs for high
availability applications.
802.3at PoE Compliant
PD Device
12~56V DC to 54~56V DC PoE Power Boost
54-56V DC PoE
10/100/1000T
100/1000X
Auto Detection
Redundant Power Input
12~56V DC