Datasheet

IGS-624HPT
2
Adjustable 6-Port Switch Mode or 4 + 2 Fiber Redundant Mode
Via the built-in DIP switch, the IGS-624HPT can be configured as 6-port Gigabit Ethernet switch or 4+2 fiber redundant mode. With the 6-port Gigabit Switch
mode, the IGS-624HPT can operate in Store-and-Forward mechanism with high performance; on the other hand, when in the 4+2 fiber redundant mode, it
provides rapid ber redundancy of link for highly critical Ethernet applications. The redundant mode also supports auto-recovering function. If the destination port
of a packet is link down, it will forward the packet to the other port of the backup pair.
Fiber Optic Link Capability for Flexible Distance Extension
The additional two mini-GBIC slot built in the IGS-624HPT supports SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP
(Small Form-factor Pluggable) ber-optic modules, meaning the administrator now can exibly choose the suitable SFP transceiver according to the transmission
distance or the transmission speed required to extend the network e󰀩ciently. The distance can be extended from 550 meters to 2 kilometers (multi-mode ber)
and 10/20/40/60/80/120 kilometers (single-mode ber or WDM ber). They are well suited for applications to uplink to backbone switch and monitoring center in
long distance.
Environmentally Hardened Design
With the IP40 metal industrial case, the IGS-624HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which
are usually found on plant oors or in curb-side tra󰀩c control cabinets without air conditioning. It features a ventilated construction in which a cooling fan is not
necessary, thereby making its operation noiseless. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-624HPT can be
placed in almost any di󰀩cult environment.
Robust Protection
The IGS-624HPT provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±6KV surge immunity to
improve product stability and protects users’ networks from devastating ESD attacks, making sure the ow of operation does not uctuate.
Location B
Surveillance Center
Ordinary Switch
Redundant
Industrial Switch
IGS-624HPT
Location A
10/100/1000BASE-T UTP
PoE
+
IP Camera
Primary Link
1000BASE-X Fiber
(Forwarding)
Redundant Link
1000BASE-X Fiber
(Block)
1000BASE-SX/LX Fiber Optic
1000
PoE
100BASE-TX UTP with PoE
PoE
PoE
PoE
PoE
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
1000
1000
Site to Site Fiber Link Redundancy of IP Surveillance
Control Center
Power
Data
550m/20km/120km
PoE
+
PTZ
Speed Dome
DC 12-56V
100m
DC
PoE
PoE
1000
IGS-624HPT
Fiber Switch
DC
Power Line (DC)
1000BASE-SX/LX Fiber Optic
1000
PoE
1000BASE-T UTP with PoE