Datasheet

IGS-624HPT
5
Product Specications
Model
IGS-624HPT
Hardware Specications
Copper Ports 4 10/100/1000BASET RJ45 auto-MDI/MDI-X ports
PoE Injector Ports Four ports with 802.3at PoE+ injector function (Port-1 to Port-4)
SFP Slots (Auto Detection)
Two 1000BASE-SX/LX/BX SFP interface (Port 5 to Port 6)
Compatible with 100BASE-FX SFP
DIP Switch Switch (default)/ber redundant mode
Connector
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Power Requirements
12~56V DC, 7A (max.)
Redundant power with reverse polarity protection
Alarm
Provides one relay output for power failure
Alarm relay current carry ability: 1A @ 24V DC
Power Consumption
Max. 7.02 watts/24BTU
(Ethernet Full Loading)
Max. 130.6 watts/445BTU
(Ethernet + PoE Full Loading)
Dimensions (W x D x H) 32 x 87 x 135 mm
Weight 657g
Enclosure IP40 metal case
Installation DIN-rail kit and wall-mount kit
ESD Protection 6KV
Switch Specications
Switch Architecture Store-and-Forward
Switch Fabric 12Gbps
Throughput (packet per second) 8.93Mpps@64bytes
Address Table 4K entries
Bu󰀨er Memory 1M bits on-chip bu󰀨er memory
Jumbo Frame 9Kbytes
Flow Control
Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Output
IEEE 802.3af Standard
- Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 51V~56V DC (depending on the power supply), max. 36 watts
PoE Power Budget (max.)
60W@12V DC input
90W@24V DC input
120W@48V-56V DC input
Max. Number of Class 4 PDs 4
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3az Gigabit SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3at Power over Ethernet Plus PSE
IEEE 802.3af Power over Ethernet Plus
IEEE 802.1p Class of Service
Environment
Temperature
Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity
Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)