User Manual
6
Chapter 6 Cable Connection Parameters
The chapter contains the cable connection parameters of the Industrial
Gigabit Ethernet Switch.
Appendix A
This chapter contains cable information of the Industrial Gigabit
Ethernet Switch.
1.3 Product Features
Physical Port
4-Port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
Layer 2 Features
IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard
Compliant
Supports Auto-negotiation and 10/100Mbps half / full duplex and
1000Mbps full duplex mode
High performance Store and Forward architecture, runt/CRC ltering
eliminates erroneous packets to optimize the network bandwidth
Prevents packet loss with back pressure (Half-Duplex) and IEEE
802.3x PAUSE frame ow control (Full-Duplex)
9K Jumbo Frame Size support
Backplane (Switching Fabric): 12Gbps
Integrated address look-up engine, support 1K absolute MAC
addresses
Automatic address learning and address aging
CSMA/CD Protocol
Industrial Case / Installation
Slim IP30 metal case / protection