Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial Power over EthernetL3 Industrial 16-Port 10/100/1000T 802.3at PoE + 4-Port 1G/2.5G SFP Managed Ethernet Switch

IGS-6325-16P4S

L3 Industrial 16-Port 10/100/1000-T 802.3at PoE + 4-Port

1G/2.5G SFP Managed Ethernet Switch

Advanced Manageable PoE Solution for Hardened Environment

PLANET IGS-6325-16P4S L3 Industrial Managed PoE+ Switch, featuring 16

10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts,

and 4 100/1000/2500BASE-X fiber ports in an IP30 rugged metal case, can be

installed in any difficult environment. It provides user-friendly yet advanced IPv6/

IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 OSPFv2

dynamic routing capability, and advanced ITU-G.8032 ERPS Ring technology to

improve the rapid self-recovery capability and PLANET intelligent PoE functions

for controlling the PoE outdoor IP surveillance and wireless network applications. It

is able to operate reliably, stably and quietly in the temperature range from -40 to

75 degrees C.

Physical Port

• 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE

802.3at PoE+ Injector function

• 4 100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type

auto detection

• One RJ45 console interface for basic management and setup

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus/end-

span PSE

• Up to 16 IEEE 802.3af/802.3at devices powered

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100m

• PoE management features

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE admin-mode control

– PoE port power feeding priority

– Per PoE port power limit

– PDclassicationdetection

• Intelligent PoE features

– Temperature threshold control

– PoE usage threshold control

– PD alive check

– PoE schedule

Industrial Protocol

• Modbus TCP for real-time monitoring in the SCADA system

• IEEE 1588v2 PTP (Precision Time Protocol)

Industrial Case and Installation

• IP30 aluminum case

• DIN-rail or wall-mount design

• 48~56V DC, redundant power with reverse polarity protection

• Supports 6KV DC Ethernet ESD protection

• -40 to 75 degrees C operating temperature

Digital Input and Digital Output

• 2 digital input (DI)

• 2 digital output (DO)

• Integrate sensors into auto alarm system

Cybersecurity Network Solution to Minimize Security Risks

The IGS-6325 Series supports SSHv2, TLS and SSL protocols to provide strong

protection against advanced threats. It includes a range of cybersecurity features

such as DHCP Snooping, IP Source Guard, ARP Inspection Protection, 802.1x

port-based and MAC-based network access control, RADIUS and TACACS+ user

accounts management, SNMPv3 authentication, and so on to complement it as an

all-security solution.

Redundant Ring, Fast Recovery for Critical Network Applications

The IGS-6325-16P4S supports redundant ring technology and features strong,

rapid self-recovery capability to prevent interruptions and external intrusions.

Summary of content (11 pages)

PAGE 1
IGS-6325-16P4S L3 Industrial 16-Port 10/100/1000-T 802.3at PoE + 4-Port 1G/2.5G SFP Managed Ethernet Switch Physical Port • 16 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector function • 4 100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type auto detection • One RJ45 console interface for basic management and setup Power over Ethernet • Complies with IEEE 802.
PAGE 2
IGS-6325-16P4S It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 10ms. Layer 2 Features • Prevents packet loss with back pressure (half-duplex) and IEEE 802.
PAGE 3
IGS-6325-16P4S Intelligent Alive Check for Powered Device Quality of Service The IGS-6325-16P4S PoE Switch can be configured to monitor connected PD’s • Ingress Shaper and Egress Rate Limit per port bandwidth status in real time via ping action. Once the PD stops working and responding, the control IGS-6325-16P4S will recycle the PoE port power and bring the PD back to work.
PAGE 4
IGS-6325-16P4S SMTP/SNMP Trap Event Alert The IGS-6325-16P4S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response.
PAGE 5
IGS-6325-16P4S Layer 3 Routing Support The IGS-6325-16P4S enables the administrator to conveniently boost network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the IPv4 OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior dynamic routing protocol for autonomous system based on link state.
PAGE 6
IGS-6325-16P4S 1588 Time Protocol for Industrial Computing Networks The IGS-6325 Series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet.
PAGE 7
IGS-6325-16P4S Applications Industrial Area Department/Workgroup PoE Switch Providing up to 16 PoE+, in-line power interfaces, the IGS-6325-16P4S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 16 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network.
PAGE 8
IGS-6325-16P4S Specifications Product IGS-6325-16P4S Hardware Specifications Copper Ports SFP/mini-GBIC Slots 16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports 4 1000BASE-SX/LX/BX SFP interfaces (Port-17 to Port-20) Compatible with 100BASE-FX and 2500BASE-X SFP PoE Injector Port 16 ports with 802.
PAGE 9
IGS-6325-16P4S Max. Number of Class 2 PDs 16 Max. Number of Class 3 PDs 16 Max. Number of Class 4 PDs 10 Layer 2 Function Port disable/enable Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Power saving mode control Port Status Port Mirroring Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status TX / RX / Both Many-to-1 monitor IEEE 802.
PAGE 10
IGS-6325-16P4S Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock) IEC60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.
PAGE 11
IGS-6325-16P4S Dimensions Top View DI 0 DI 1 DO 0 DO 1 GND GND V1+ DC1 1A@24V V2+ Fault Input: 48-56V DC2 , 7.5A max. Dual power input is required for maximum PoE loading. Refer to user’s manual for more details. Side View Front View Side View Mounting Kit Rear View 802.3at PoE+ P1 1 2 3 4 5 6 7 8 9 10 P2 Fault Ring R.O.