Datasheet

2
IGS-6325-16P4S
• Transfer alarm to IP network via email and SNMP trap
Layer 2 Features
• Prevents packet loss with back pressure (half-duplex) and
IEEE802.3xpauseframeowcontrol(full-duplex)
• High performance of Store-and-Forward architecture, and runt/
CRClteringeliminateserroneouspacketstooptimizethe
network bandwidth
• Storm Control support
– Broadcast/Multicast/Unicast
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Up to 4K VLANs groups, out of 4094 VLAN IDs
– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
– Private VLAN Edge (PVE)
– Protocol-based VLAN
– MAC-based VLAN
– Voice VLAN
– GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 10 trunk groups with 4 ports per trunk group
– Up to 8Gbps bandwidth (duplex mode)
• Provides port mirror (many-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcona
particular port
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
• Compatible with Cisco Uni-directional link detection(UDLD) that
monitors a link between two switches and blocks the ports on
both ends of the link if the link fails at any point between the
two devices
• Link Layer Discovery Protocol (LLDP)
Layer 3 IP Routing Features
• Supports maximum 128 static routes and route summarization
• IPv4 dynamic routing protocol supports OSPFv2
• IPv4/IPv6 hardware static routing
• Routing interface provides per VLAN routing mode
It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant
power input system into customer’s industrial automation network to enhance
system reliability and uptime in harsh factory environments. In a simple Ring
network, the recovery time of data link can be as fast as 10ms.
1000
1000
1000
1000
1000
Industrial
PoE Switch
Industrial
PoE Switch
Industrial MAN Switch
8-Port MAN Switch
Industrial MAN Switch
Factory
Highway
Office
Control Center
Ring for Metropolitan Area Network Application
Recovery Time < 10ms
PoE
PoE
PoE
PoE
High Power PoE for Security and Public Service Applications
As the whole system comes with a total 320-watt PoE budget, the IGS-6325-
16P4S is designed specifically to satisfy the growing demand of higher power
consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n)
wireless LAN access points, PTZ (pan, tilt, zoom) speed dome network cameras
and other PoE network devices.
Convenient and Smart ONVIF Devices with Detection Feature
PLANET has newly developed an awesome feature -- ONVIF Support -- which
is specifically designed for co-operating with video IP surveillances. From the
IGS-6325-16P4S GUI, clients just need one click to search and show all of
the ONVIF devices via network application. In addition, clients can upload floor
images to the switch series, making the deployments of surveillance and other
devices easy for planning and inspection purposes. Moreover, clients can get
real-time surveillance’s information and online/offline status; the PoE reboot can
be controlled from the GUI.