Datasheet

3
IGS-6325-16P4S
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
– IEEE 802.1p CoS
– IP TOS/DSCP/IP precedence
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policingontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4IGMPsnoopingportltering
• IPv6MLDsnoopingportltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
– IEEE 802.1x port-based / MAC-based network access
authentication
– Built-in RADIUS client to co-operate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS / TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC / IP address binding
• DHCPSnoopingtolterun-trustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IPSourceGuardpreventsIPspoongattacks
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Console/Telnet Command Line Interface
– Web switch management
Intelligent Alive Check for Powered Device
The IGS-6325-16P4S PoE Switch can be configured to monitor connected PD’s
status in real time via ping action. Once the PD stops working and responding, the
IGS-6325-16P4S will recycle the PoE port power and bring the PD back to work.
It also greatly enhances the reliability in that the PoE port will reset the PD power,
thus reducing administrator’s management burden.
PD Alive Check
Restart PoE device if without response
Step 3
Checking alive status for 3 times
Step 2
No Response!
Ping Request
PoE
ON OFF
Restart PoE Device
Step 4
PoE Device Status Good!!
Step 1
Ping Request
Ping Echo
Alarm Notification
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental
protection on the Earth, the IGS-6325-16P4S can effectively control the power
supply besides its capability of giving high watts power. The built-in “PoE schedule”
function helps you to enable or disable PoE power feeding for each PoE port
during specified time intervals and it is a powerful function to help SMBs or
enterprises save power and money.
Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours
Total Saved = 10800watts/month
6 Watts 6 Watts 12 Watts 12 Watts
PoE Schedule
08:00~17:00 17:00~08:00
6 Watts 6 Watts 12 Watts 12 Watts
OFF OFF OFF
ON ON ON ON ON
Scheduled Power Recycling
The IGS-6325-16P4S allows each of the connected PoE IP cameras or PoE
wireless access points to reboot at a specific time each week. Therefore, it will
reducethechanceofIPcameraorAPcrashresultingfrombufferoverow.
IP Camera
S M T W T F S
AP Router IP Phone
PoE lighting
Door Phone
Automatically Reboot