Datasheet

IGS-6325-16P4S
3
• Trafc classication
–
IEEE 802.1p CoS
–
IP TOS/DSCP/IP precedence
–
IP TCP/UDP port number
–
Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policing on the switch port
• DSCP remarking
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port ltering
• IPv6 MLD snooping port ltering
• MVR (Multicast VLAN Registration)
Security
• Authentication
–
IEEE 802.1x port-based / MAC-based network access
authentication
–
Built-in RADIUS client to co-operate with the RADIUS
servers
–
TACACS+ login users access authentication
–
RADIUS / TACACS+ users access authentication
• Access Control List
–
IP-based Access Control List (ACL)
–
MAC-based Access Control List
• Source MAC / IP address binding
• DHCP Snooping to lter un-trusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with
invalid MAC address to IP address binding
• IP Source Guard prevents IP spoong attacks
• IP address access management to prevent unauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
–
Console/Telnet Command Line Interface
–
Web switch management
–
SNMP v1 and v2c switch management
–
SSH, TLS, SSL and SNMP v3 secure access
• SNMP Management
–
Four RMON groups (history, statistics, alarms, and
events)
–
SNMP trap for interface Link Up and Link Down
notication
Intelligent Alive Check for Powered Device
The IGS-6325-16P4S PoE Switch can be configured to monitor connected PD’s
status in real time via ping action. Once the PD stops working and responding, the
IGS-6325-16P4S will recycle the PoE port power and bring the PD back to work.
It also greatly enhances the reliability in that the PoE port will reset the PD power,
thus reducing administrator’s management burden.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental
protection on the Earth, the IGS-6325-16P4S can effectively control the power
supply besides its capability of giving high watts power. The built-in “PoE
schedule” function helps you to enable or disable PoE power feeding for each
PoE port during specied time intervals and it is a powerful function to help SMBs
or enterprises save power and money.
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification
PoE
1000BASE-TX UTP with PoE
6 Watts 6 Watts 12 Watts 12 Watts
Total Consumption of 36 watts/hr
PoE
PoE PoE
PoE
Power
On
Power
On
Power
On
Power
On
5 PM8 AM
5 PM 8 AM
6 Watts 6 Watts 12 Watts 12 Watts
Save 24 watts/hr during off-business hours
PoE PoE
Total Saved = 10800watts/month
PoE PoE
Power
On
Power
Off
Power
Off
Power
Off