Datasheet

5
IGS-6325-16P4S
Digital Input and Digital Output for External Alarm
The IGS-6325 Series supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and
log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the
administrators if the IGS-6325 Series’ port shows link down, link up or power failure.
Layer 3 Routing Support
The IGS-6325-16P4S enables the administrator to conveniently boost network efciency by conguring Layer 3 IPv4/IPv6 VLAN static routing manually, and
the IPv4 OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior dynamic routing protocol for autonomous system based on link
state. The protocol creates a database for link state by exchanging link states among Layer 3 switches, and then uses the Shortest Path First algorithm to
generate a route table based on that database.
Robust Layer 2 Features
The IGS-6325 Series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN,
Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-6325 Series provides 802.1Q tagged VLAN, and
the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-6325 Series allows the operation of a high-speed trunk
combining multiple ports. It enables a maximum of up to 6 trunk groups with 4 ports per trunk group, and supports fail-over as well.
Alarm Warning Alarm MessagingSecurity OK!!
Digital Output
Enclosure
Door Detector
(Door Closed)
Door Detector
(Door Open)
Enclosure
Digital Input
Uplink
RJ45 Cable
Link Down
Fiber Cable
Link Down
DC Power Failure
I/O I/O I/O I/O
System
Log
SNMP
TRAP
Mail
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
LACPMSTP
Q-in-Q LLDPQoS
MLD
IGMP
L2/L4
Managed Switch
L2/L4
Managed Switch