Quick Guide

15
6.RecoveringBacktoDefaultConguration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address “192.168.0.100” and the
user password to factory default mode (default password is admin), press the
hardware-based reset button on the front panel for about 10 seconds. After
the device is rebooted, you can log in the management Web interface within the
same subnet of 192.168.0.xx and default password. Be noted that all the previous
setupswillbedisappearedafterthefactorydefaultresetismade.
1
3
5
7
2
4
6
8
9
11
13
15
10
12
14
16
Reset
Console
115200,N,8,1
19
20
P1 P2
Ring R.O.
Fault
I/O
IGS-6325-16P4S
ACTLNK
PoE-in-Use
802.3at PoE+
17
18
ACT1000 LNK
ACT100 LNK
Reset Button
Figure 6-1: IGS-6325 Series Reset Button