Quick Guide

7
4. Terminal Setup
Tocongure the system,connectaserialcable toaCOMporton aPCornotebook
computerandtoRJ45typeserial(console)portoftheIndustrialManagedSwitch.
Console Port
115200,N,8,1
RJ45 to DB9 RS232 Cable
PC/Workstation with
Terminal Emulation Software
IGS Industrial Managed Switch
Serial Port
A terminal program is required to make the software connected to the Industrial
ManagedSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Parity:None
Databits:8
Stopbits:1
Flowcontrol:None