Datasheet

7
IGS-6325 Rack-mount PoE series
Specications
Product
IGS-6325-24P4X IGS-6325-24P4S
HardwareSpecications
Copper Ports 24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
4 100/1000BASE-X SFP interfaces, shared with Port-21 to Port-24
Backward compatible with 100BASE-FX SFP transceiver
SFP+ Slots
4 10GbBASE-SR/LR SFP+ interfaces (Port-25 to Port-
28) Backward compatible with 1000BASE-SX/LX/BX SFP
transceiver
N/A
Console 1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 128Gbps/non-blocking 48Gbps/non-blocking
Throughput 95.2Mpps@64Bytes 35.7Mpps@64Bytes
Address Table 16K entries, automatic source address learning and aging
Shared Data Buffer 32M bits
Flow Control
IEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame 10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
ESD Protection 5KV DC
Enclosure IP30 metal case
Connector
Fixed 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC
DI and DO
2 Digital Input (DI):
Level 0: -24~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Max. input current: 10mA
2 Digital Output (DO): Open collector to 24VDC, 100mA
LED Indicators
System:
DC1 (Green), DC2 (Green), Fault (Red)
Ring (Green), R.O. (Green), DI/DO (Red)
10/100/1000T RJ45 PoE+ Interfaces (Port 1 to Port 24):
PoE-in-Use (Amber)
LNK/ACT (Green)
100/1000Mbps SFP Combo Interfaces (Port 21 to Port 24):
1000Mbps LNK/ACT (Green)
100Mbps LNK/ACT (Amber)
1/10Gbps SFP+ Interfaces (Port 25 to Port 28) for IGS-6325-24P4X:
10Gbps LNK/ACT (Green)
1Gbps LNK/ACT (Amber)
Dimensions (W x D x H) 440 x 300 x 44 mm, 1U height
Weight 3800g 3740g
Power Consumption
Max. 33 watts/112.51 BTU
(Power on without any connection)
Max. 33 watts/112.51 BTU
(Power on without any connection)
Max. 540 watts/1841.13 BTU
(Full loading with PoE function)
Max. 536 watts/1828.90 BTU
(Full loading with PoE function)
Power Requirements Dual 48~56V DC (>53V DC for PoE+ output recommended), 11A
Power Over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
PoE Power Output
IEEE 802.3af Standard
- Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
- Per port 52V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment 1/2(+), 3/6(-)