Datasheet

IGS-6325-5X1T
2
– MAC-based VLAN
– Voice VLAN
– GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
– IEEE 802.1D Spanning Tree Protocol (STP)
– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
– BPDU Guard
• Supports Link Aggregation
– 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
– Maximum 3 trunk groups, with 6 ports for each trunk
• Provides port mirror (many-to-1)
• Port mirroring to monitor the incoming or outgoing trafc on
a particular port
• Loop protection to avoid broadcast loops
• Link Layer Discovery Protocol (LLDP)
• Compatible with Cisco uni-directional link detection (UDLD)
that monitors a link between two switches and blocks the
ports on both ends of the link if the link fails at any point
between the two devices
• Supports G.8032 ERPS (Ethernet Ring Protection
Switching)
• IEEE 1588v2 PTP (Precision Time Protocol) transparent
clock mode
Quality of Service
• Ingress shaper and egress rate limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafc classication
– IEEE 802.1p CoS
– ToS/DSCP/IP Precedence of IPv4/Ipv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafc-policing on the switch port
• DSCP remarking
• Voice VLAN
Multicast
• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
The fiber-optic 10GBASE-X SFP+ interfaces support triple speeds, 10GBASE-
SR/LR, 2500BASE-X and 1000BASE-SX/LX, meaning the administrator now can
flexibly choose the suitable SFP/SFP+ transceiver according to the transmission
distance or the transmission speed required to extend the network efficiently. The
IGS-6325-5X1T provides broad bandwidth and powerful processing capacity.
10Gbps
VS
PLANET Industrial All-port 10Gigabit Ethernet Switch
for High-speed Network Applications
1.8Gbps-3.6Gbps
5G NR
Base Station
2.4Gbps-4Gbps
Wi-Fi 6/6E
Access Point
1.8Gbps-3.6Gbps
5G NR
Base Station
2.4Gbps-4Gbps
Wi-Fi 6/6E
Access Point
ISP
Internet Service Provider
1Gbps
1Gbps
1Gbps
10Gbps
10Gbps
10Gbps
General
Industrial Gigabit Switch
IGS-6325-5X1T
Industrial Switch
10Gigabit
1Gbps
Loading... Loading...
Redundant Ring, Fast Recovery for Critical Network Applications
The IGS-6325-5X1T supports redundant ring technology and features strong,
rapid self-recovery capability to prevent interruptions and external intrusions.
It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection
Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant
power input system into customer’s industrial automation network to enhance
system reliability and uptime in harsh factory environments. In a simple ring
network, the recovery time of data link can be as fast as 10ms.
Layer 3 Routing Support
The IGS-6325-5X1T enables the administrator to conveniently boost network
efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, the
RIP (Routing Information Protocol) or OSPF (Open Shortest Path First) settings
automatically.
The RIP can employ the hop count as a routing metric and prevent routing loops
by implementing a limit on the number of hops allowed in a path from the source to
a destination.
The OSPF is an interior dynamic routing protocol for autonomous system based
on link state. The protocol creates a database for link state by exchanging link
states among Layer 3 switches, and then uses the Shortest Path First algorithm to
generate a route table based on that database.