Quick Guide

7
4. Terminal Setup
Tocongurethesystem,connect a serialcabletoaCOM port on a PC or notebook
computerandtoRJ45typeserial(console) portoftheIndustrialManagedSwitch.
PC/Workstation with
Terminal Emulation Software
Serial Port
Console Port
115200,N,8,1
IGS Industrial Managed Switch
Console
115200,N,8,1
RJ45 to DB9 RS232 Cable
A terminal program is required to make the software connected to the Industrial
Managed Switch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
 Baud: 115200
Parity:None
 Data bits: 8
 Stop bits: 1
Flowcontrol:None