Datasheet

IGT-815AT
2
Interactive Network Detection
The IGT-815AT can support LFP (Link Fault Passthrough) function via its built-in DIP switch. The LFP function includes Link Loss Carry Forward (LLCF)
and Link Loss Return (LLR):
■LLCFmeanswhenadeviceisconnectedtotheconverterandtheTPlinelosesthelink,theconverter’sberportwilldisconnectthelinkoftransmission.
■LLRmeanswhenadeviceisconnectedtotheconverterandtheberlinelosesthelink,theconverter’sberportwilldisconnectthelinkoftransmission
The administrator will be immediately alerted about the above two issues and the solutions can be solved by closely monitoring the network without having to
go the actual site.
DC
Power Line (DC)
1000BASE-SX/LX Fiber-optic
1000
1000BASE-T UTP
550m / 20km 100m
DC 9~48V
IGT-815AT
DC
Data
Power
Data
IP Camera
Monitoring
Center
1000
Fiber Switch
IP Camera
LFP
Enabled
LFP
Enabled
Copper Cable Copper Cable
Monitoring Center
IP Camera
Fiber Cable
LFP
Enabled
LFP
Enabled
Copper Cable
Copper Cable
Monitoring Center
Copper Link Broken
1
Copper
Link Down
5
LFP disconnects
Fiber Link
2
LFP disconnects
Copper Link
4
Fiber Link Down
3
1000
1000
Fiber Cable
Remote Link
Broken
Remote Link
Normal
1000BASE-SX/LX Fiber-optic
1000
1000BASE-T UTP