Datasheet

IGT-815AT
5
ProductSpecications
Model
IGT-815AT
HardwareSpecications
Copper Port
10/100/1000BASE-T Ethernet TP interface. Maximum 100m distance.
Auto-negotiation, auto MDI/MDI-X
SFP Port
1000BASE-SX/LX/BX SFP interface
Compatible with 100BASE-FX SFP
Flow Control
Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode
Maximum Frame Size 9K
LED
System: Power (green)
Fiber 100/1000BASE-X: LNK/ACT (green)
TP 10/100/1000BASE-T: LNK/ACT(green), 1000 LNK/ACT (amber)
Dimensions(WxDxH) 30 x 70 x 104 mm
Weight 221g
Power Requirements
DC 9~48V, supports reverse polarity protection
AC 24V
Power Consumption
System ON without loading
DC9V:0.55W/1.87BTU
DC12V:0.54W/1.84BTU
DC24V:0.52W/1.77BTU
DC36V:0.5W/1.7BTU
DC48V:0.52W/1.77BTU
AC24V:0.5W/1.7BTU
Full loading
DC9V:1.76W/6BTU
DC12V:1.77W/6BTU
DC24V:1.63W/5.56BTU
DC36V:1.65W/5.62BTU
DC48V:1.68W/5.73BTU
AC24V:2.8W/9.5BTU
DIP Switch
Off: LFP (Link Fault Passthrough) disable
On: LFP (Link Fault Passthrough) enable
FEF (Far End Fault) works with LFP to prevent data loss
The DIP switch is turned off by default.
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount ear
ESD Protection 6KV DC
Cables
10/100/1000BASE-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters)
EIA / TIA-568 100-ohm STP (maximum 100 meters)
100BASE-FX/1000BASE-SX/LX:
Multi-mode:50/125μmor62.5/125μmopticalber
Single-mode:9/125μmopticalber
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Protocols and Standards Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE802.3azEnergyEfcientEthernet(EEE)
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environment
Temperature
Operating: -40~75 degrees C
Storage: -40~85 degrees C
Humidity
Operating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)