User Manual

16
2.1.3 LED Indicators
 System:
LED Color Function
P1 Green Lit: indicates power 1 has power.
P2 Green Lit: indicates power 2 has power.
FAULT Green Lit: indicates either power 1 or power 2 has no power.
 Gigabit Fiber Interface
LED Color Function
Fiber
LNK/
ACT
Green
Lit: indicates that the Fiber Optical Port is
successfully connecting to the network at
1000Mbps (IGTP-802T/IGTP-802TS), at
100Mbps/1000Mbps (IGTP-805AT).
Blinks:indicatestheberopticalportisreceivingor
sending data.
 Gigabit TP Interface
LED Color Function
TP
LNK/
ACT
Green
Lit: indicates that the Gigabit Ethernet Port is
successfully connecting to the network at
10/100/1000Mbps.
Blinks: indicates the Gigabit Ethernet Port is
receiving or sending data.
TP
1000
Lit: indicates that the Gigabit Ethernet Port is
successfully connecting to the network at
1000Mbps. OFF indicates the Gigabit Ethernet
Port is successfully connecting to the network at
10/100Mbps.
 PoE
LED Color Function
PoE
in-Use
Orange
Lit: Indicates that the port is providing DC 52V to
remote powered device.
Off: Indicates that the port is not providing DC 52V
to remote powered device.