User Manual

17
2.1.4 Converter Upper Panel
The upper panel of the Industrial 802.3at PoE Media Converter consists
of one terminal block connector within two DC power inputs. Figure 2-3
shows the upper panel of the Industrial 802.3at PoE Media Converter.
Input
DC12~48V, AC 24V
V1+ V1- V2+ V2-
PWR1 PWR2
Fault
1 2 3 4 5 6
Figure 2-3: Industrial 802.3at PoE Media Converter Upper Panel
2.1.5 Wiring the Power Inputs
The 6-contact terminal block connector on the top panel of Industrial
802.3at PoE Media Converter is used for two DC redundant power
inputs. Please follow the steps below to insert the power wire.
1. Insert positive/negative DC power wires into contacts 1 and 2 for
POWER 1, or 5 and 6 for POWER 2.
1 2 3 4 5 6
Input
DC12~48V, AC 24V
V1+ V1- V2+ V2-
PWR1 PWR2
Fault
V1+ V1- V2+ V2-