User Manual

27
 Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP)
Model
Speed
(Mbps)
Connector
Interface
Fiber
Mode
Distance
Wavelength
(TX)
Wavelength
(RX)
Operating
Temp.
MFB-FA20
MFB-FB20
100
WDM
(LC)
Single
Mode
20km
1310nm 1550nm
0 ~ 60
degrees C
1550nm 1310nm
MFB-TFA20
MFB-TFB20
100
WDM
(LC)
Single
Mode
20km
1310nm 1550nm
-40 ~ 75
degrees C
1550nm 1310nm
MFB-TFA40
MFB-TFB40
100
WDM
(LC)
Single
Mode
40km
1310nm 1550nm
-40 ~ 75
degrees C
1550nm 1310nm
2.2.4 802.3at PoE Installation
The IGTP-80xT and the IEEE 802.3at/802.3af Injector installation:
Before your installation, it is recommended to check your network
environment. If there is any IEEE 802.3at/802.3af devices needed to
power on, the IGTP-805xT can provide you a way to supply power for
this Ethernet device conveniently and easily.
The IGTP-80xT needs DC 12-48V or AC 24V input and it injects the DC
power into the pin of the twisted pair cable (Pins 1, 2, 3 and 6).
PoE+
Speed Dome
Fiber Switch
1000
PoE
Power
DataData
Power Line (AC)
AC
DC
Power Line (DC)
1000BASE-SX/LX Fiber-optic
1000
PoE
1000BASE-T UTP with PoE
IGTP-80xT
550m / 10km 100 meters
DC
AC
Industrial DIN Rail
Power Supply
DC12V-48V, AC 24V Output