User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HARDWARE INSTALLATION
- 3. INDUSTRIAL MODBUS GATEWAY MANAGEMENT
- 3.1 Overview
- 3.2 Requirements
- 3.3 Management Methods
- 3.4 PLANET Smart Discovery Utility
- 3.5 PLANET Modbus Gateway Utility
- 3.5.1 Installing PLANET Modbus Gateway Utility
- 3.5.2 PLANET Modbus Gateway Utility Menu Bar
- 3.5.3 PLANET Modbus Gateway Utility Shortcut Menu Bar
- 3.5.3.1 User Manager
- 3.5.3.2 Import Network Topology
- 3.5.3.3 Export Network Topology
- 3.5.3.4 Zoom In
- 3.5.3.5 Zoom Out
- 3.5.3.6 Search Device
- 3.5.3.7 Save Topology
- 3.5.3.8 Delete Topology
- 3.5.3.9 Batch IP Settings
- 3.5.3.10 Batch Monitoring IP Settings
- 3.5.3.11 Hide Device Tree/Show Device Tree
- 3.5.3.12 Hide Alarm List/Show Alarm List
- 3.5.3.13 Auto Refresh Topology
- 3.5.3.14 Refresh Interval
- 3.5.4 PLANET Modbus Gateway Utility Device Function
- 4. WEB MANAGEMENT
- 5. COMMAND LINE INTERFACE
- 6. COMMAND LINE MODE
- APPENDIX A
User’s Manual of IMG-110T
-16-
3. INDUSTRIAL MODBUS GATEWAY MANAGEMENT
This chapter describes how to manage the Industrial Modbus Gateway. Sections include:
- Overview
-Requirements
- Management Methods
- PLANET Smart Discovery Utility
- PLANET Modbus Gateway Utility
3.1 Overview
This chapter gives an overview of the Industrial Modbus Gateway management. The Industrial Modbus Gateway provides a
remote IP-based WEB browser/Telnet interface. Using these interfaces, you can perform various configuration and
management activities, including:
Figure 3-1: Industrial Modbus Gateway Web Menu Bar
Figure 3-2: Industrial Modbus Gateway Telnet Menu
Please refer to the following Chapters 4, 5 and 6 for more details.