User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HARDWARE INSTALLATION
- 3. INDUSTRIAL MODBUS GATEWAY MANAGEMENT
- 3.1 Overview
- 3.2 Requirements
- 3.3 Management Methods
- 3.4 PLANET Smart Discovery Utility
- 3.5 PLANET Modbus Gateway Utility
- 3.5.1 Installing PLANET Modbus Gateway Utility
- 3.5.2 PLANET Modbus Gateway Utility Menu Bar
- 3.5.3 PLANET Modbus Gateway Utility Shortcut Menu Bar
- 3.5.3.1 User Manager
- 3.5.3.2 Import Network Topology
- 3.5.3.3 Export Network Topology
- 3.5.3.4 Zoom In
- 3.5.3.5 Zoom Out
- 3.5.3.6 Search Device
- 3.5.3.7 Save Topology
- 3.5.3.8 Delete Topology
- 3.5.3.9 Batch IP Settings
- 3.5.3.10 Batch Monitoring IP Settings
- 3.5.3.11 Hide Device Tree/Show Device Tree
- 3.5.3.12 Hide Alarm List/Show Alarm List
- 3.5.3.13 Auto Refresh Topology
- 3.5.3.14 Refresh Interval
- 3.5.4 PLANET Modbus Gateway Utility Device Function
- 4. WEB MANAGEMENT
- 5. COMMAND LINE INTERFACE
- 6. COMMAND LINE MODE
- APPENDIX A
User’s Manual of IMG-110T
-40-
3.5.4.4 Reset Factory Settings
This function is to reset PLANET Modbus Gateway to default as the procedure is shown below:
Step 1: Activate PLANET Modbus Gateway Utility.
Step 2: Search the Industrial Modbus Gateway that needs to be reset to default and choose the device.
Step 3: Right-click to choose the “Restore Factory Settings”.
Figure 3-37: Planet Modbus Gateway Utility Device Function -- Restore Factory Settings Screen
Step 4: Click “Yes” when the “Are you sure to restore factory settings” pop window appears.
Figure 3-38: Planet Modbus Gateway Utility Device Function -- Restore Factory Settings Screen
Step 5: Press “OK” to complete the factory default procedure.