User Manual

User’s Manual of IMG-110T
-46-
The page includes the following configurable data:
Network Settings
• Use the
following IP
Address
Choose static IP address for the Industrial Modbus Gateway.
• Automatically
Obtain IP
Address
Enable the DHCP function for the Industrial Modbus Gateway.
When enabling this function, the Industrial Modbus Gateway will send a DHCP request to
the DHCP server in the network. Once the DHCP Server gets the request, it will assign a
dynamic IP address, subnet mask and gateway to the Industrial Modbus Gateway. The
factory default setting is “Disable”.
• IP Address
Manually assign IP address to the Industrial Modbus Gateway.
The factory default value is 192.168.0.100
• Subnet Mask
Manually assign subnet mask to the Industrial Modbus Gateway.
The factory default value is 255.255.255.0
• Gateway
Manually assign Gateway to the Industrial Modbus Gateway.
The factory default value is 192.168.0.254
• Use the
following DNS
Server Address
Choose static IP address for the DNS server of Industrial Modbus Gateway.
• Automatically
obtain DNS
server address
Enable the DHCP function for the DNS server of Industrial Modbus Gateway.
• DNS Server
DNS is the way that Internet domain names are identified and translated into IP
addresses. A domain name is an alphanumeric name, such as planet.com, which is
usually easier to remember. Assign the DNS server IP address.
IP Report
• Server Address
Need to report to the top of the host IP.
• Server Port
When reporting or listening to the port, the default is 4002.
• Repeat Time
Report IP interval (seconds); the default is 10.
Button
: Click to apply changes.