User Manual

User’s Manual of IMG-110T
-53-
The page includes the following fields:
Slave ID Map Table
Channel No.
Display the channel number.
Channel Type
This parameter is to choose RTU Master/RTU Slave/ASCII Master/ASCII Slave
operation modes; the default mode is RTU Slave.
Channel Definition
Display the channel definition information.
Slave ID Range
(Virtual~~~Real)
Display the Slave ID Range information.
Operate
Provide Delete and Modify button.
Press
to access the following parameters screen.
Figure 4-8: Slave ID Parameters Screen
The page includes the following fields:
Remote IP Address
Allow input the remote IP address.
TCP Port
This parameter is to input the TCP port and available range is 1-65535.
Slave ID Start
This parameter is to input the start Slave ID and available range is 0-247.
Slave ID End
This parameter is to input the end Slave ID and available range is 0-247.
Slave ID Offset
This parameter is to input the offset Slave ID and available range is -253-253.
Buttons
: Click to apply changes.
: Click to apply changes.
: Click to delete setting.
: Click to modify setting.