User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HARDWARE INSTALLATION
- 3. INDUSTRIAL MODBUS GATEWAY MANAGEMENT
- 3.1 Overview
- 3.2 Requirements
- 3.3 Management Methods
- 3.4 PLANET Smart Discovery Utility
- 3.5 PLANET Modbus Gateway Utility
- 3.5.1 Installing PLANET Modbus Gateway Utility
- 3.5.2 PLANET Modbus Gateway Utility Menu Bar
- 3.5.3 PLANET Modbus Gateway Utility Shortcut Menu Bar
- 3.5.3.1 User Manager
- 3.5.3.2 Import Network Topology
- 3.5.3.3 Export Network Topology
- 3.5.3.4 Zoom In
- 3.5.3.5 Zoom Out
- 3.5.3.6 Search Device
- 3.5.3.7 Save Topology
- 3.5.3.8 Delete Topology
- 3.5.3.9 Batch IP Settings
- 3.5.3.10 Batch Monitoring IP Settings
- 3.5.3.11 Hide Device Tree/Show Device Tree
- 3.5.3.12 Hide Alarm List/Show Alarm List
- 3.5.3.13 Auto Refresh Topology
- 3.5.3.14 Refresh Interval
- 3.5.4 PLANET Modbus Gateway Utility Device Function
- 4. WEB MANAGEMENT
- 5. COMMAND LINE INTERFACE
- 6. COMMAND LINE MODE
- APPENDIX A
User’s Manual of IMG-110T
-59-
4.7 Access Control
This function provides access control parameters of Industrial Modbus Gateway, including:
-Device Security
-IP Filtering
-MAC Filtering
-User Management
4.7.1 Device Security
This function allows setting up the device security functions of Industrial Modbus Gateway. Press the “Submit” button to apply
the setting as the screen in Figure 4-18 appears.
Figure 4-18: Access Control -- Device Security Screen
The page includes the following configurable data:
Web Console
This function provides “Disable” or “Enable” the Web management interface.
Telnet Console
This function provides “Disable” or “Enable” the Telnet management interface.
Device Search
This function provides “Disable” or “Enable” the device search function.
Firmware Upgrade
This function provides “Disable” or “Enable” the firmware upgrade function.
Button
: Click to apply changes.