User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. HARDWARE INSTALLATION
- 3. INDUSTRIAL MODBUS GATEWAY MANAGEMENT
- 3.1 Overview
- 3.2 Requirements
- 3.3 Management Methods
- 3.4 PLANET Smart Discovery Utility
- 3.5 PLANET Modbus Gateway Utility
- 3.5.1 Installing PLANET Modbus Gateway Utility
- 3.5.2 PLANET Modbus Gateway Utility Menu Bar
- 3.5.3 PLANET Modbus Gateway Utility Shortcut Menu Bar
- 3.5.3.1 User Manager
- 3.5.3.2 Import Network Topology
- 3.5.3.3 Export Network Topology
- 3.5.3.4 Zoom In
- 3.5.3.5 Zoom Out
- 3.5.3.6 Search Device
- 3.5.3.7 Save Topology
- 3.5.3.8 Delete Topology
- 3.5.3.9 Batch IP Settings
- 3.5.3.10 Batch Monitoring IP Settings
- 3.5.3.11 Hide Device Tree/Show Device Tree
- 3.5.3.12 Hide Alarm List/Show Alarm List
- 3.5.3.13 Auto Refresh Topology
- 3.5.3.14 Refresh Interval
- 3.5.4 PLANET Modbus Gateway Utility Device Function
- 4. WEB MANAGEMENT
- 5. COMMAND LINE INTERFACE
- 6. COMMAND LINE MODE
- APPENDIX A
User’s Manual of IMG-110T
-64-
4.8.2 System File
This function allows setting up the factory default/Configuration backup and restore/web firmware upgrade functions of
Industrial Modbus Gateway as the screen in Figure 4-23 appears.
Figure 4-23: System Management-System File Screen
The page includes the following configurable data:
Factory Configuration
Load Factory Default
Press the “Start” button to start factory default process.
Upload Configuration File from Local PC
Download
Configuration
Press the “Download” button to download the configuration file to local PC.
Upload Configuration
Press the “Choose File” to find the configuration file and press the “Upload” button
to start the configuration upload process.
Upgrade Firmware from Local PC
Update Firmware
Press the “Choose File” to find the firmware file and press the “Upgrade” button to
start the firmware upgrade process.