User Manual
Table Of Contents
- Chapter 1. INTRODUCTION
- Chapter 2. HARDWARE INSTALLATION
- Chapter 3. INDUSTRIAL MODBUS GATEWAY MANAGEMENT
- Chapter 4. WEB MANAGEMENT
- Chapter 5. COMMAND LINE INTERFACE
- Chapter 6. COMMAND LINE MODE
- APPENDIX A
User’s Manual of IMG-120T
-60-
RTS
Indicate the “On” or “Off” status of RTS function.
Clear ALL
This function allows to clear the current serial COM port traffic counter in
Transmit (TX) and Receive (RX).
4.7 Access Control
This function provides access control parameters of Industrial Modbus Gateway, including:
-Device Security
-IP Filtering
-MAC Filtering
-User Management
4.7.1 Device Security
This function allows setting up the device security functions of Industrial Modbus Gateway. Press the “Submit”
button to apply the setting as the screen in Figure 4-18 appears.
Figure 4-18: Access Control -- Device Security Screen
The page includes the following configurable data:
Web Console
This function provides “Disable” or “Enable” the Web management
interface.
Telnet Console
This function provides “Disable” or “Enable” the Telnet management
interface.