User Manual
Table Of Contents
- Chapter 1. INTRODUCTION
- Chapter 2. HARDWARE INSTALLATION
- Chapter 3. INDUSTRIAL MODBUS GATEWAY MANAGEMENT
- Chapter 4. WEB MANAGEMENT
- Chapter 5. COMMAND LINE INTERFACE
- Chapter 6. COMMAND LINE MODE
- APPENDIX A
User’s Manual of IMG-120T
-63-
Button
: Click to apply changes.
4.7.4 User Management
This function allows setting up the user management function of Industrial Modbus Gateway. Press the “Submit”
button to apply the setting as the screen in Figure 4-21 appears.
Figure 4-21: Access Control -- User Management Screen
The page includes the following configurable data:
Authentication
This function provides “Disable” or “Enable” the authentication function.
Number
Indicate the number from 1 to 3 for user management items.
User Name
Display the current user name information.
Password
Display the current password length.
Permission
This function provides “Administrator” or “Guest” for the access
permission.
Guest only views the Industrial Modbus gateway state and only the system
administrator can configure the parameters of the Industrial Modbus Gateway.
Operation
This function provides editing the current username and password setting; the
available range is 20 letters.