Datasheet

IMG-2200T/IMG-2400T
3
Effective Alarm Alert for Better Protection
TheIMG-2x00TseriescomeswithaFaultAlarmfeaturewhichcan alerttheuserswhenthereissomething wrongwiththeSerialDeviceServer.Withthis
idealfeature,theuserswouldnothavetowastetimefindingwheretheproblemis.Itwillhelptosavetimeandhumanresource.The IMG-2x00TSeries
provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting
response.
Dual Power Input for High Availability Network System
TheIMG-2x00TSeriesfeaturesastrongdualpowerinputsystemwithwide-rangingvoltages(12V~48VDC)incorporatedintocustomer’sautomation
networktoenhancesystemreliabilityanduptime.Intheexamplebelow,whenPowerSupply1failstowork,thehardwarefailoverfunctionwillbeactivated
automaticallytokeeppoweringtheIMG-2x00TSeriesviaPowerSupply2withoutanybreakofoperation.
Digital Input and Digital Output for External Alarm (only 2400T)
Withdigitalinputanddigitaloutputonitsfrontpanel,anexternalalarmcanhelpusersviathedigitalinputtodetectandlogexternaldevicestatus(suchas
door intrusion detector), and then immediately send an event alarm to the administrator. The digital output can be used to alarm the administrator if the IMG-
2400T serial port shows DCD, changed DSR or power failure.
PWR1
PWR2
RS232 Connection
Failed via DCD/DSR
DC/DC Power Failure
Fault Alarm Feature
SNMP
TRAP
Buzzer
or
System
Log
DC
DC
Non-stop Ethernet Service with Dual Power Input & Auto Failover
IMG-2200T
12V~48V DC
12V~48V DC
DC DC
Power
1
Power
2
Active Active
Modbus
Equipment
Modbus
Equipment
DC
Power Line (DC)
Serial Line (RS-XXX)
|O|O|
12V~48V DC
12V~48V DC
DC DC
Power
1
Power
2
Active
IMG-2200T