Datasheet

IMG-2200T/IMG-2400T
6
Product
IMG-2200T IMG-2400T
Serial Interface
Serial Ports 2xDB9male 4xDB9male
Serial Standards RS232 / 4-wire RS422 or RS485 / 2-wire RS485
Baud Rate (Data Rate) 50bps to 921Kbps
Data Bits 5, 6, 7, 8
Parity Type 1, 1.5, 2
Stop Bit Odd, Even, None, Space, Mark
Flow Control
RTS/CTS and DTR/DSR (RS232 only)
XON/XOFF
Signals
RS232:TxD,RxD,RTS,CTS,DTR,DSR,DCD,GND
RS422:Tx+,Tx-,Rx+,Rx-,GND
4-wireRS485:Tx+,Tx-,Rx+,Rx-,GND
2-wireRS485:DataA(+),DataB(-),GND
Pin Assignment
Operation Mode
RTU Master/RTU Slave/ASCII Master/ASCII Slave
Master mode: Supports up to 32 TCP slave connection requests
Slave mode: Supports up to 32 TCP master connection requests
Serial Line Protection
2KV isolation protection
1KV (level 2) surge protection
15KV ESD protection
Ethernet Interface
Ethernet Ports 2xRJ45
Standard 10/100BASE-TX
Distance 100m
Switch Architecture Store-and-Forward-
Address Table 1K
ESD Protection 6KV
Surge Protection 2KV
Hardware
Installation DIN-rail kit and wall-mount ear
Enclosure IP30/40 metal IP 40 metal
Dimensions(WxDxH) 32x97x135mm 56x87x135mm
Weight 392g 625 g
LED Indicators
System: Power 1, Power 2, Fault, SYS
TP Port: Link/ Active
SerialPort:TxandRx
System: Power 1, Power 2, Fault, SYS,I/O
TP Port: Link/ Active
SerialPort:TxandRx
Power Requirements 12~48VDC,redundantpowerwithpolarityreverseprotectionfunction
Power Consumption
Full Loading
12VDC: 0.326A (3.8 watts)
24VDC: 0.176A (4.2 watts)
48VDC: 0.114A (5.4 watts)
Full Loading
12VDC: 0.419A (5.1 watts)
24VDC: 0.227A (5.4 watts)
48VDC: 0.136A (6.5 watts)
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
DI and DO N/A
2 Digital Input (DI):
Level0:-24V~2.1V(±0.1V)
Level1:2.1V~24V(±0.1V)
InputLoadto24VDC,10mAmax.
2 Digital Output (DO):
Opencollectorto24VDC,100mAmax.
Specications