Datasheet

IMG-2200T/IMG-2400T
7
Alarm
Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Management
Management Interfaces
Web management
Telnet Console management
Windows-based VCOM Utility management
SNMPv1, v2c / SNMP Trap
UNI-NMS monitoring
PLANET Smart Discovery Utility
IP Version IPv4 and IPv6
Operation Mode
RTU Master
RTU Slave
ASCII Master
ASCII Slave
Virtual COM Utility Platform Supports
Windows-based only:
Windows XP
Windows Server 2003
Windows 7
Windows Server 2008
Windows 8 (Must install the latest version of WinPcap)
Windows Server 2012 (Must install the latest version of WinPcap)
Windows 10
Fault Alarm Record: System log / SNMP trap
Time NTP
Security Allowmax.4accessibleIPaddresshosts/ranges
SNMP MIBs
RFC1213 MIB-II
RFC1317 RS232-like MIB
Standards Conformances
Regulatory Compliance
FCC Part 15 Class A,
CECerticationClassA
Stability Testing
IEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Standards
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 854 Telnet
RFC 958 NTP
RFC 1591 DNS (client only)
RFC 1908 SNMPv2c
RFC 2068 HTTP
RFC 2131 DHCP Client
RFC 2732 Format for Literal IPv6 Addresses in URL's
RFC 3315 DHCPv6 Client
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNSv6
RFC 4443 ICMPv6
EIA/TIA RS232/422/485
Environment
Operating Temperature -40~75degreesC
Storage Temperature -40~85degreesC
Humidity
5~95%(non-condensing)