IPOE-171-Series (V3) User Manual

ManualsBrandsPLANET Technology ManualsPoEIndustrial Single-Port Multi-Gigabit 802.3bt PoE++ Injector (60W, -40~75C, 48~56VDC)

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET IPOE-171 Single-port

10/100/1000Mbps series injector.

Model LAN Port Speed PoE Standard PoE Budget

IPOE-171-60W 10/100/1000Mbps IEEE 802.3at/bt 60 watts

IPOE-171-95W 10/100/1000Mbps IEEE 802.3at/bt 95 watts

Please unpack the box of the device carefully, and the box should

contain the following items:

 802.3bt PoE injector x 1

 User’s manual x 1

 Dust cap x 2

 Wall-mount Kit x 1

If any item is found missing or damaged, please contact your local

reseller for replacement.

Power Consumption 75 watts max. 120 watts max.

No. of devices that can

be powered

Installation DIN-rail kit or wall-mount ear

Alarm

Provides one relay output for power failure

Alarm Relay current carry ability: 1A @

DC 24V

Enclosure IP30 slim type metal case

Power over Ethernet

PoE Standard IEEE 802.3at/bt PSE

PoE Power Output

Budget

DC 50~53V

60-watt

PoE via 4-pair

DC 50~53V

30-watt

PoE via 2-pair

DC 54V

95-watt

PoE via 4-pair

DC 54V

30-watt

PoE via 2-pair

PoE Power Output

Max. 60W@1m

cable

Max. 51W@100m

cable

-DC 24V~48V input:

Max. 89.5W@1m

cable

Max. 75W@100m

cable

-DC 12V input:

Max. 60W@1m

cable

Max. 52W@100m

cable

PoE Power Supply Type End-span + Mid-span

Power Pin Assignment

Pair 1 End-span: 1/2 (-), 3/6 (+)

Pair 2 Mid-span: 4/5 (+), 7/8 (-)

IPOE-171-95W LED Indicators:

LED Color Function

P1 Green Lights to indicate power 1 has power.

P2 Green Lights to indicate power 2 has power.

FAULT Red

Lights to indicate either power 1 or power 2 has

no power.

PoE-in-

Use

Amber

Lights to indicate the device is providing PoE

power.

PoE

Usage

Amber

30W:

1.OtoindicatethePoEusageislessthan14W.

2. Blinks to indicate that the PoE usage is around

15W to 29W.

3. Lights to indicate the PoE usage is around

30W to 44W.

60W:

1. Blinks to indicate that the PoE usage is

around 45W to 59W.

2. Lights to indicate the PoE usage is around

60W to 74W.

90W+:

1. Blinks to indicate that the PoE usage is

around 75W to 89W.

2. Lights to indicate the PoE usage is at the

maximum.

PoE Mode of IPOE-171 series:

PoE Mode Description

Standard

(Default)

The standard mode is chosen to provide power to the

PD devices that follow the IEEE 802.3at/bt standard.

Legacy

The legacy mode supports PoH and Ultra PoE. It is

chosen to provide power to the PD devices that do not

fully follow the IEEE 802.3af/at/bt standard.

3. Product Outlook

3.1 Product Outlook

20W 40W 60W+

PoE Power Usage

PoE

in-Use

Standard Legacy

10/100/1000T

Ethernet

10/100/1000T

Ethernet+DC

P1 P2 Fault

IPOE-171-60W

802.3bt

30W 60W 90W+

PoE Power Usage

PoE

in-Use

Standard Legacy

10/100/1000T

Ethernet

10/100/1000T

Ethernet+DC

P1 P2 Fault

IPOE-171-95W

802.3bt

Figure 1: IPOE-171-60W outlook Figure 2: IPOE-171-95W outlook

2.ProductSpecications

Product IPOE-171-60W IPOE-171-95W

HardwareSpecications

Interface

Input Port

1 x RJ45 STP

Data In

Output Port

1 x RJ45 STP

PoE (Data + Power) Out

Input Power

Terminal

Block

Network Cable*

Twisted-pair cable up to 100 meters

(328ft)

10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6

100BASE-TX: 4-pair UTP Cat. 5, 5e, 6

1000BASE-T: 4-pair UTP Cat. 5e, 6

LED Indicators

System: Power 1 (Green),

Power 2 (Green), Fault (Red)

PoE Port: PoE-in-Use x 1 (Amber)

PoE Usage: PoE Usage x 3 (Amber)

Data Rate 10/100/1000Mbps

Dimensions

(W x D x H)

135 x 87.8 x 32 mm

Weight 430g 470g

Power Requirements

DC 52~56V,

2A max.

DC 12~48V,

5A max.

Unit Output Voltage DC 50~53V DC 54V

PoE Mode

Standard: To provide power to the PD

devices that follow the IEEE 802.3at/bt

standard.

Legacy: To provide power to the PD

devices that do not fully follow the IEEE

802.3af/at/bt standard. Besides, the

Legacy mode supports PoH and Ultra PoE.

Standards Conformance

Standards Compliance

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3bt 4-pair Power over Ethernet

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3af Power over Ethernet

Regulatory Compliance FCC Part 15 Class A, CE

Environment

Operating Temperature -40 ~ 75 degrees C

Storage Temperature -40 ~ 85 degrees C

Operating Humidity

5 ~ 90%, relative humidity,

non-condensing

Storage Humidity

5 ~ 90%, relative humidity,

non-condensing

Caution

1. As IEEE 802.3bt device provides high power, please

use high-quality network cable and RJ45 connector.

2. The maximum PoE output power depends on the

cable length, the quality of cable, and DC input

voltage.

IPOE-171-60W LED Indicators:

LED Color Function

P1 Green Lights to indicate power 1 has power.

P2 Green Lights to indicate power 2 has power.

FAULT Red

Lights to indicate either power 1 or power 2 has

no power.

PoE-in-

Use

Amber

Lights to indicate the device is providing PoE

power.

PoE

Usage

Amber

 Monitor DC input voltage:

When user powers on POE-171-60W, the injector

will detect the DC input voltage and then PoE

UsageLEDwillashthreetimes.

20W: Flashing three times means the DC input

voltage is 48~50.9V.

40W: Flashing three times means the DC input

voltage is 51~52.9V.

60W+: Flashing three times means the DC input

voltage is 53~56V.

 Monitor power usage:

20W:

1.OtoindicatethePoEusageislessthan9W.

2. Blinks to indicate that the PoE usage is around

10W to 19W.

3. Lights to indicate the PoE usage is around 20W

to 29W.

40W:

1. Blinks to indicate that the PoE usage is around

30W to 39W.

2. Lights to indicate the PoE usage is around 40W

to 49W.

60W+:

1. Blinks to indicate that the PoE usage is around

50W to 59W.

2. Lights to indicate the PoE usage is at the

maximum.

Note

After changing the PoE mode, please power off and

then on the PoE injector to make the change effective.

3.2 Industrial PoE++ Injector Upper Panel

The upper panel of the IPOE-171 series has one terminal block

connector where there are two DC power inputs.

Max. fault loading: 24V, 1A

V1+

V2+

PWR1

PWR2Fault

DC Input:

52-56V , 2A max.

1 2 3 4 5 6

Figure 3: IPOE-171-60W upper panel.

Max. fault loading: 24V, 1A

V1+

V2+

PWR1

PWR2Fault

DC Input:

12-48V , 5A max.

1 2 3 4 5 6

Figure 4: IPOE-171-95W upper panel.

3.3 Wiring the Power Inputs

The 6-contact terminal block connector on the top panel of the

IPOE-171 series is used for two DC redundant power inputs. Please

follow the steps below to insert the power wire.

Summary of content (2 pages)

PAGE 1
. Package Contents Thank you for purchasing 10/100/1000Mbps series injector. Model Power Consumption PLANET LAN Port Speed IPOE-171-60W 10/100/1000Mbps IPOE-171-95W 10/100/1000Mbps IPOE-171 PoE Standard IEEE 802.3at/bt IEEE 802.3at/bt Single-port PoE Budget 60 watts 95 watts Please unpack the box of the device carefully, and the box should contain the following items:  Dust cap x 2 120 watts max. No.
PAGE 2
Step 1: Insert Positive / Negative DC power wires into Contacts 1 and 2 for POWER 1, or 5 and 6 for POWER 2. Max. fault loading: 24V, 1A This section describes how to install the industrial device and make connections to it. Please read the following sections and perform the procedures in the order being presented. 1 2 3 4 5 6 V2+ V1+ PWR1 Fault PWR2 4. Mounting Installation DC Input: 12-48V , 5A max. Figure 5: Power input pins.