Datasheet

IPOE-175S
4
ProductSpecications
Product
IPOE-175S
HardwareSpecications
Interface
Input Port (SFP Slot)
1x10/100/1000BASE-TEthernetwithIEEE802.3btPoE++
“PoE+Data”in RJ45 port
Output Port
1x10/100/1000BASE-T
“Data”out RJ45 port
OutputPowerTerminalBlock 1 x 2-pin terminal block“DC”outport
Data Rate 10/100/1000Mbps
LED Indicator
PWR (Green)
DC Ready x 1 (Green)
Input Voltage 44~56V DC
Power Requirement
4-pair 802.3at PoE+ and 802.3bt PoE++ : 52~56V DC
802.3at PoE+ : 48~56V DC
Power Consumption
Ethernet full loading without DC output:
Full loading with maximum 12V DC, 5A output: 70watts
ESD Protection
Air 8KV DC
Contact 6KV DC
Surge Protection 6KV
Enclosure IP67-rated and IK10 aluminum case
Installation Wall-mount ear
Dimensions (W x D x H)
150 x 43.8 x 72.94 mm
169.85 x 43.8 x 72.94 mm, with cable gland
Weight 424g
MTBF >100,000 hours
Network Cable
10BASE-T:UTPcategory3,4,5cable(≤100m)
100BASE-TX:UTPcategory5,5ecable(≤100m)
1000BASE-T:UTPcategory5e,6cable(≤100m)
Power over Ethernet
PoE Standard
IEEE 802.3bt PoE++ type 3 PD
BackwardcompatiblewithIEEE802.3atPoE+
PoE Power Supply Type
802.3btPoE++/PoH(PoweroverHDBaseT)
802.3at PoE+ End-span/Mid-span
PoE Power Output DC 12V, 5A (60W, full load)
Power Pin Assignment 1/2 (-); 3/6 (+), 4/5 (+), 7/8 (-) or 1/2 (+); 3/6 (-), 4/5 (+), 7/8 (-)
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing
IEC 60068-2-32 (Free fall)
IEC 60068-2-27 (Shock)
IEC 60068-2-6 (Vibration)
Protocols and Standards Compliance
IEEE802.310BASE-TEthernet
IEEE802.3u100BASE-TXFastEthernet
IEEE802.3ab1000BASE-TGigabitEthernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
Environment
Operating Temperature -40 ~ 75 degrees C
Storage Temperature
-40 ~ 85 degrees C