Datasheet

IPOE-E202
3
One Power Sourcing for Multi Powered Devices Solution
ToachievethebenetsofIPsurveillanceandthelong-distanceIPcameradistribution,PLANETIPOE-E202isquiteausefulaccessoryifusershavemost
of their network already set up, and wish to expand network communications and overcome cable distance limitations offering connections to devices in
locations where traditional networking does not allow.
The IPOE-E202 industrial 1-port PoE+ to 2-port 802.3af/at Gigabit PoE Extender requires very little installation time and does not require any additional setup
or programming by just using standard RJ45 cable from power sourcing device (PSE). The PoE+ injector port of the PSE supplies IEEE802.3at PoE+ power
to the IPOE-E202 and then the IPOE-E202 converts power for 2 powered devices that are IEEE 802.3af/at PoE standard compliant, meaning any additional
power adapter for IP cameras and wireless access points is not necessary.
Applications
Plug and Play, and Easy Cabling Installation
The IPOE-E202 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD). The
IPOE-E202 injects power to the PD without affecting the data transmission performance. The IPOE-E202 offers a cost-effective and quick solution to doubling
the standard range of PoE from 100 to 200 meters. The IPOE-E202 is designed in a compact box containing three RJ45 ports, of which one "PoE IN" port
functions as PoE (Data and Power) input and the other two "PoE OUT" ports on the other side function as PoE (Data and Power) output. The "PoE OUT"
port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously between the PSE and PD.
100m
100m
IP Camera
IP Camera
IPOE-E202
100m
Control Center
PoE
PoE
PoE
PSE/PoE
Switch
PoE
PoE
PoE
IPOE-E202
PoE
PoE
20m
100m
20m
PoE
802.3af/at PoE Out 802.3at PoE In
PoE
PoE
PoE